Recent content by kinzua

Reconfirm your BIOS setup. What Mobo are you on?

Hey thanks guys. As i'd mentioned earlier, the USB was made with UEFI support and i was trying to boot with legacy settings in BIOS mode. Finally i realised my mistake, changed BIOS settings and was able to install El Capt on the build. Yayee !! But then strangely, i was only able to boot my...

Ok. I had made my USB with UEFI support and kept my BIOS to boot with legacy. :roll2::roll2::roll2::roll2: So finally i am getting to install el capitan. Will report my further findings.

Seems like a bad day for me. I am trying to create a bootable pen drive with Unibeast 5.0.1 and my older mavericks installer. And now all i get is this. What should i do now?

I have an iMac. I lost my previous USB, i used to boot my hackintosh. Do u suggest i should make another USB, boot back to yosemite with the older setup?? I could do that. The question is what to do after that?? What steps i took that went wrong? :banghead:

how can i remake the flash drive. I can't boot from my HD also. I tried changing my USB, that didn't help too. I've removed all USB devices and removed the HDMI monitor. Also unplugged the ethernet cable. When i did boot with this USB the first time around. Things went fine!! Why am i facing...

I miserably got stuck at the Yosemite -> El Capitan update. As recommended here's what i did : * Was running Yosemite with unibeast + multibeast. * Created the USB using unibeast 6.1.1 * System restart and ran a Yosemite boot from USB to see if things were fine. * Boot went as usual. *...

Thanks @colinzeal and @wildwillow. I seem to be back on track now. The BIOS seemed to have reset the settings. I did find out out EvoReboot and installed it while in Safe Mode. Then i also changed to AHCI and also changed the other settings on the BIOS from my previous known setup. And now i...

@colinzeal how should i check that, the EvOre kext. I did try this. I set up to boot in AHCI. I believe it had gone off earlier. Now i can boot in Safe Mode only. I get this weird transition lines like you get in a keynote presentation. Can you please help me on this??

hey there.. i had to reinstall everything from scratch. Learnt a lesson and did a partition for running the OS and data separately. Things had been fine until today and the BIOS got corrupt again. Yes, the BIOS got corrupt again. After about 5 months, it happened to do it again. The dual BIOS...

-- bump --

thanks @PresidentEvil I know of coolers that exist in the market, what i am specifically wanting to know is that if there is some way that i can ramp up the fan's RPM. M using HWMonitor and i get to see that the Fan's RPM is stuck around 1200. Is there a way that i can pump this up?? I read...

Please some one guide me on this.

Hey all, I am running a GA B75M-D3H mobo on a i7-4770K processor. My rig has been working fine until i started to work with some 'heavy' build softwares. Now when i am operating under normal conditions, The rig boots up at ~35˚C Under normal conditions it rakes upto ~45˚C When i start...

M having the same issue. It was working fine with the earlier Mavericks hack, but now, the packager in itself is not opening up. I seem to be unable to understand. I believe the installer i have from AWUS is supported up till Mavericks. Thats the only absurd guess that i can make.