Recent content by carpman

@joeblough Apologies for digging up this thread, but I just got myself a nec spectraview reference pa301 30" monitor which can run at 2560x1600, but the max i can see in display settings is 1600x1200? You have an old system with the same motherboard as me and was wondering if and how you got...

Ok, finally got my workstation up and running after the move, decided to try and get the rx560 working from boot. Upgrade to , still no joy then found this info on another thread 1. Disable CSM in the BIOS (needed to set OS option to Win 8 to be able to do this) 2. Disable Intel GPU...

Hi, ok edited post to make clear that with initial video card in bios set iGFX i can boot to RX 560 fine, but only get active screen at login screen. Yes it is a real pain, but moving start of next month so just going to have leave as is till have more time.

Well that's a story, in my efforts to get it working i ended up with an install that would not load OSX, would get a black screen with white square in top left corner, even with known working efi folder in place! Ended up nuking efi folder doing a repair install from recover boot after booting...

Ok, so reverted back to using lilu and WhateverGreen kexts added your suggestion and disabled the patch from option 4 from OP. Long story short, i could not boot to RX560, but could from from HD4000, though could not swap cables to use RX560, just got black screen, even when i tried enabling...

Thanks for reply, i will give your suggestion a try. Note i don't normally use inject ati, just giving it a try. Are you using lilu and WhateverGreen kexts?

Ok removed injectati and deinit, left ig-platform id at 0x01660007 Removed lilu and WhateverGreen texts and tried: option 4 Note i deleted dirs in: system/library/caches/com.apple.kext.caches/ Option 4 loads to black screen, same both with and without internal graphic enabled. Note if i...

Hi, ok using option 2 from OP i can get it to boot ok until the apple logo and load bar should appear, but they don't? Must be missing something in my settings! Here is config.plist i tried. Note did try deinit.

Would have thought that if it worked with older cpu/graphics it would work with later better supported one! Seems not, tried Lilu and Whatevergreen kexts but boots with error in attached photo, tried adding deinit, but then just boots to black screen. Should not that when making changes system...

I am trying to get the tempo e2p working on my ga-z77x-up5-th, would the patch work on this MB? i used to use the sonnet driver, but this does not work in HS. thanks

Hi, did try RadeonDeInit = true, but no joy. Will try again, and then give Lilu and Whatevergreen kexts a try. Though bit flummoxed as to why it booted to RX560 without these when have i7-2600 installed? thanks

Hi, not using evergreen or radeondeint, not sure what setting framebuffer is? May give 14.3 a try. thanks

Hi, update on my efforts. I did a fresh install with no RX installed, all worked, but no acceleration and wrong Intel card reported, messed about for ages before realising that my system (built many years ago) did not have the i7-3770 cpu, but the i7-2600 ! doh Made some edits to config.plist...

Ok, got my i7 3770k installed, made edits to config.plist InjectIntel IntelGFX= (empty) ig-platform-id = 0x01620007 Boots with Intel HD4000 fine, all working good. With RX 560 booting with -v all goes well till i would expect the apple logo and load bar to appear then log on screen, but...

Lol, very embarrassing, seems my cpu is actually a Intel Core i7-2600 Quad Core 3.40GHz 8MB so looks like all is correct :) Off to find a Intel Core i7-3770K - 3.5GHz