Recent content by c0c0p0ps

  1. c0c0p0ps

    General NVMe Drive Problems (Fatal)

    As someone with a 2TB Sabrent Rocket Q4 and a 1TB Samsung 970 ECO, I am pretty interested in this as well. I also have the Sensei app from Cindori which as you say claims to use its own driver - In fact with trim enabled through a Clover patch although it shows under system profiler with a...
  2. c0c0p0ps

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    Hi @Simon70 Sorry it has been a few days. My equipment has all been packed down as I have been moving into a new studio! I didn't change the USB ports kext in that EFI I sent as I personally use an SSDT to inject all my USB and keep below the port limit. I will try and test your EFI for you...
  3. c0c0p0ps

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    Thanks for sharing. Really interesting to see some of the config options, as there are a lot of things in there which I thought were totally irrelevant for this board and definitely are not needed for Big Sur. I have tweaked a few things and swapped over the SMC kexts to use the AcidAnthera...
  4. c0c0p0ps

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    Hey @Simon70 That is good to hear that you have got it booting in Monterey already as I am sure it will only be a few weeks till release now. I would be interested to see what changes you had to make to the Clover config as I am also running an i9-9900 in this board along with a Titan Ridge...
  5. c0c0p0ps

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    What is a PNP0200? Is that something I should have or be injecting somehow or just a limitation of my board? I will take a couple of power line adapters to work tomorrow to test my internet connection through the Ethernet port with this VT-d configuration. My memory is just a 4 x 16GB kit that...
  6. c0c0p0ps

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Not that I can find. I have attached a Save As for you to double check.
  7. c0c0p0ps

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hey @CaseySJ Have been following your experiments with VT-d. I thought I would give these settings a whirl on my Asus Hero X Z370 board with an i9-9900KS, and have some interesting results to share. I enabled VT-d and Intel virtualization in the BIOS, removed dart=0, and unchecked...
  8. c0c0p0ps

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    I run Big Sur with Clover on this board and it works great! Had no issues updating from Mojave but read first on the GitHub that you must not hide the Preboot volume in Clover config and select that to boot from the same as OpenCore does. Here is my config which passes the the new Clover...
  9. c0c0p0ps

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hey Casey hope you are keeping yourself well. Not posted in a while as my rig is still running great but saw this and just wondered has anyone who flashed the Designaire NVM33 patched firmware to their Titan Ridge PCIE given any feedback on how it functions in 11.3 or 11.4? I actually have that...
  10. c0c0p0ps

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    For anyone interested, I have successfully updated direct from last Mojave to current version of Big Sur with no issues whatsoever. Still using Clover (latest version 5132) but with all Acidanthera kexts, and just ran the update straight from the Sys Prefs software update. Install took a LONG...
  11. c0c0p0ps

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    https://www.tonymacx86.com/threads/storks-myhero-ii-build-asus-rog-maximus-z370-hero-x-i7-8700k-amd-rx-580.245074/post-2098977 Been rocking this in a Hero X build for 10 months now! I actually flashed again with the NVM33 after that post in your thread as well and have had no issues with my...
  12. c0c0p0ps

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    Am not on OpenCore yet, but on the latest clover which has a lot of openCore embedded these are the Quirks I am booting with for this board on Mojave -
  13. c0c0p0ps

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    I have a 1tb Samsung 970 Evo and it has never given me any issues. I do have the Acidanthera NVMe Fix kext https://github.com/acidanthera/NVMeFix but even before didn't have problems. There was a firmware issue at one point with some of the Samsungs but that got resolved a while back I think...
  14. c0c0p0ps

    Stork's MyHero II Build: ASUS ROG MAXIMUS Z370 HERO X - i7-8700K - AMD RX 580 - Thunderbolt 3

    I have been running VirtualSMC and its plugins for a few years now after switching memory driver to use OCQuirks and Runtime Services which are now incorporated in Clover anyway. I just figured as Lilu is such a key kext for so many other kexts it made more sense to use as much from Acidanthera...
  15. c0c0p0ps

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Also deauthorize any software licences!
Top