Recent content by boumbo

problem solved, in this graphic card there is 3x hdmi port 1x dvi port and 1xdp only one of the hdmi port work , if connected on the two others ..... black screen

Hi, i made a new hackintosh, i have a gigabyte h97-d3h last bios and a gigabyte gtx1050ti OC; i made a freshly new installation of mac os sierra 10.12.5 My graphic card is shown as " monitor 6MB" , so i installed nvidia graphic web drivers and then black screen i tried to change the default...

Hi, there is another solution to use apple pro speakers on new macs, thare is no need to cut the original cable execpt to change the end jack with a standard stereo jack. i do it for me and have connect the apple pro speakers on a basic leipai amplifier, it works fine. the trick is that...

My bad, i found the problem and fix it , it was that i use the airport/bluetooth apple board PCI-E mod and i use the 3.3V of the PCI-E port. If i use the 3.3v of the PCI-E port to power the bluetooth apple board, the sleep is broken. I had to use the 5V USB header and regulated it to 3.3V for...

does someone have any clues or fix? thanks

Hi, i try but unfortunately it doesn't fix the problem, i have always the auto wake up after few seconds

Hi, i have a problem with sleep with my mackintosh (GA-Q77M-D2H+ i5 3570k) when i make my hackintosh go to sleep, the hackintosh sleep and then 2sec later wake up itself and then go to sleep and 2sec later wake up ,etc in loop. i tried to change the graphic card= same problem -i tried to...

Sleep problem with gigabyte GA-Q77M-D2H+ i5 3570k Hi, i have a problem with sleep when i make my hackintosh go to sleep, the hackintosh sleep and then 2sec later wake up itself and then go to sleep and 2sec later wake up ,etc in loop. i tried to change the graphic card= same problem -i...

what is your configuration , hd3000 only or hd3000+pci-e graphic card? what is your OS version 10.7.4?have you one or two display at the same time? what have you already done? what modifications have you made in your kext?

Hi, if you want more people try this method, someone should upload the non modified IOUSBFamily.kext from the update or the modified one preferably. it is a lot of time to download the update (1.2GB), extract the few MB kext file, modify it, for trying to make the apple usb3.0 kext working...

Hi toleda, i solved the problem, i made a fresh installation mac os x 10.7.3 nad then: -copy your extra folder from asus mini kit= hackintosh work perfectly, sleep work too. -i update to 10.7.4= hackintosh blocked -i remove ssdt.aml from extra folder= hackintosh blocked -i start with the...

Hi i can't ignore the rtc message, in verbose, it block to the RTC message and then auto reboot so i can't tell you if the sleep work with it.i am gonna make a new reinstallation, what are all the kexts do you use with your P8H67-I-DELUXE? PXHCD,Fakesmc,Realtek official kext for the network...

Hi toleda, it is a i5 2500k i am using hd3000 when i use the extra directory included in asus mini kit, in verbose mode it block at "RTC: only one single ram bank 128 bytes." i remove the SSDT.aml, the hackintosh work but no c state and no p state, and i have the sleep issue. if i use the...

Hi toleda, i have an P8H67-I-DELUXE, i was under 10.7.3 with your dsdt patch only,no extra kext more than fakesmc et PXHCD and the multibeast patched applehda for alc892 that allowed a perfect sleep with the led blinking and the wake up was perfect too. Since the 10.7.4 update, i had kernel...

Hi, i confirm , sorry to not having keeping you in touch: using the 3.3v pci-e slot current breaking the sleep mode. if you want to have your sleep mode, you need to use the usb header used for connecting bluetooth module 5v current and regulat it to 3.3v. you can buy a 5.5v to 3.3v regulator...