- Joined
- Apr 7, 2014
- Messages
- 2
- Mac
- Classic Mac
- Mobile Phone
[solved] Kernel Panic at UniBeast installer, Mavericks+Haswell
Hello, very new to this and failing at the first hurdle with a kernel panic "kernel trap" just when trying to boot the UniBeast installer from a USB flash drive. I'm using a Haswell 4770 with a Gigabyte H87-HD3 motherboard. There is an Nvidia GTX 750 Ti in the PCI-X slot, but I've connected the screen to the integrated graphics.
I removed one stick of RAM so that there's only 4GB (Crucial 1600MHz).
Vt-d is disabled.
Tried with HDMI and VGA, no difference.
Tried dart=0 and GraphicsEnabler=No, same problem.
With no boot flags (except -v), I can get as far as the following line without a kernel panic:
But then it hangs, as described in this post.
Any further advice?
Hello, very new to this and failing at the first hurdle with a kernel panic "kernel trap" just when trying to boot the UniBeast installer from a USB flash drive. I'm using a Haswell 4770 with a Gigabyte H87-HD3 motherboard. There is an Nvidia GTX 750 Ti in the PCI-X slot, but I've connected the screen to the integrated graphics.
I removed one stick of RAM so that there's only 4GB (Crucial 1600MHz).
Vt-d is disabled.
Tried with HDMI and VGA, no difference.
Tried dart=0 and GraphicsEnabler=No, same problem.
With no boot flags (except -v), I can get as far as the following line without a kernel panic:
Code:
[FONT=Helvetica Neue][IOBluetoothHCIController][start] -- completed[/FONT]
But then it hangs, as described in this post.
Any further advice?