- Joined
- May 9, 2014
- Messages
- 18
- Motherboard
- Acer E5-575
- CPU
- i5-6200U
- Graphics
- HD 520
- Mobile Phone
Hi guys,
I bought a B590 a couple of weeks ago nd I am trying to get Mavericks 10.9.3 on it.
i3 3120, HM77 chipset, 8GB RAM, HD4000, 512GB SSD and 750 GB 7200 HDD.
Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Intel Centrino 6300 wifi which I will replace with an Atheros chip I have.
Screen is 1366x768 15.6" crap, but I work at home office most of the time. HDMI is connected to a 22" Full HD monitor. I have a USB Microsoft keyboard and USB mouse.
Fingerprint scanner works fine in Windows 8.1, but I assume it's useless in OSX.
So anyways, I downloaded the Mavericks 10.9.3 full installer from the Mac Store and did the usual Unibeast creation. Selected 10.9 and Laptop support which ran fine.
Now when I try to install from my USB drive, I never reach the OSX welcome screen where you choose the language. The video blacks out and HDMI doesn't work correctly. Tried without HDMI too. I tried GraphicsEnabler=No IGPEnabler=Yes -v -f. The screen scrolls with large 80x24 text verbosing boot messages and then switches to a higher resolution text mode. Then it goes totally black and I can't see any more text. The laptop is booting because I can ping it from my smartphone. Video is just not working correctly. Can someone help?
Thanks in advance,
Rojocapo
I bought a B590 a couple of weeks ago nd I am trying to get Mavericks 10.9.3 on it.
i3 3120, HM77 chipset, 8GB RAM, HD4000, 512GB SSD and 750 GB 7200 HDD.
Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Intel Centrino 6300 wifi which I will replace with an Atheros chip I have.
Screen is 1366x768 15.6" crap, but I work at home office most of the time. HDMI is connected to a 22" Full HD monitor. I have a USB Microsoft keyboard and USB mouse.
Fingerprint scanner works fine in Windows 8.1, but I assume it's useless in OSX.
So anyways, I downloaded the Mavericks 10.9.3 full installer from the Mac Store and did the usual Unibeast creation. Selected 10.9 and Laptop support which ran fine.
Now when I try to install from my USB drive, I never reach the OSX welcome screen where you choose the language. The video blacks out and HDMI doesn't work correctly. Tried without HDMI too. I tried GraphicsEnabler=No IGPEnabler=Yes -v -f. The screen scrolls with large 80x24 text verbosing boot messages and then switches to a higher resolution text mode. Then it goes totally black and I can't see any more text. The laptop is booting because I can ping it from my smartphone. Video is just not working correctly. Can someone help?
Thanks in advance,
Rojocapo