Unibeast waiting for root device

[TheDrizzle_0]

The same screen as before with the artefacts or the no boot?

sorry the no boot

 

[wildwillow]

sorry the no boot

Ok with the system definition at Mac Pro 3,1 type GraphicsEnabler=No at the chimera boot screen and see if the card is recognised correctly and gets rid of those glitches, also have you used the 6850 in windows and has it presented you will the similar problems?

 

[TheDrizzle_0]

Ok with the system definition at Mac Pro 3,1 type GraphicsEnabler=No at the chimera boot screen and see if the card is recognised correctly and gets rid of those glitches, also have you used the 6850 in windows and has it presented you will the similar problems?

No with windows everything runs and looks fine. I booted GraphicsEnabler=No and my card still shows up as 6xxxx and the glitches still occur

 

[wildwillow]

No with windows everything runs and looks fine. I booted GraphicsEnabler=No and my card still shows up as 6xxxx and the glitches still occur

Which DVI port are you using on your 6850? Also what seems to be strange is that you are having the same graphics problems when using both your 6850 and your on board. In your Bios what is your initial display set to, try changing it to auto. As I think that you are still using the on board.

 

[TheDrizzle_0]

Which DVI port are you using on your 6850? Also what seems to be strange is that you are having the same graphics problems when using both your 6850 and your on board. In your Bios what is your initial display set to, try changing it to auto. As I think that you are still using the on board.

Im using the port on my motherboard, just switched to the dvi port on my graphics card, everything works fine except now the internet doesnt work....

 

[wildwillow]

Im using the port on my motherboard, just switched to the dvi port on my graphics card, everything works fine except now the internet doesnt work....

Phew, i was wondering why nothing had changed until now.

Select in MultiBeast the Lnx2Mac in Drivers/network. Install the release version and then it will ask you to restart after the installation.

 

[TheDrizzle_0]

Phew, i was wondering why nothing had changed until now.

Select in MultiBeast the Lnx2Mac in Drivers/network. Install the release version and then it will ask you to restart after the installation.

lol OK!!! Now it recognizes my TV but its not displaying anything on the TV. Again im using to connect to the tv via HDMI on my graphics card

 

[wildwillow]

lol OK!!! Now it recognizes my TV but its not displaying anything on the TV. Again im using to connect to the tv via HDMI on my graphics card

Lol now try typing GraphicsEnabler=Yes at the chimera boot screen. You are using HDMI-HDMI or DVI-HDMI?

 

[TheDrizzle_0]

Lol now try typing GraphicsEnabler=Yes at the chimera boot screen. You are using HDMI-HDMI or DVI-HDMI?

yea graphicsenabler=yes and HDMI-HDMI

 

[wildwillow]

yea graphicsenabler=yes and HDMI-HDMI

Everything working ok now?