Contribute
Register

ZenBR's Build: Asus P8Z77-M Pro + i5 3570K + Intel HD4000 - Mountain Lion

Status
Not open for further replies.
I followed the boot0 Error guide and now I can boot successfully.

http://www.tonymacx86.com/25-boot0-error-official-guide.html

Audio, network, sleep/wake are all functional. USB is only functional through the 2 USB 2.0 ports.

By the way, thank you ZenBR for getting me this far, I couldn't have done it without your help!
 
I don't understand why your Geekbench score is so high. I have almost the same hardware combination and only 10000 score.

My build:

Asus P8Z77-I Deluxe
Core i5-3570K
8Gb 1600Mhz Samsung DDR3 RAM
180Gb Intel 330 Series SSD

I've tried iMac and Mac Pro 3.1 profiles, same result.
 
Because my system is overclocked to 4.7Ghz and memory from 1600 to 2100Mhz.
 
zenbr said:
Because my system is overclocked to 4.7Ghz and memory from 1600 to 2100Mhz.
Click to expand...

Thank you for answer. I didn't notice that.
 
Following your guide made everything work like a charm (2nd or 3rd try needed for onboard audio for some reason). Thanks a lot!
Now I just need to get teh bootloader working... not had much luck with any yet.
 
Hackintosh
Z370 HD3 |  i5 8600K |  GeForce GTX 670
Hi guys,
it’s my first post, so thank you to all this great community for the help provided. ^^’
Now:

My gig is al most the same as ZenBR (same Mobo of course) but I have a Nvidia card GTX670.

I menaged to flash BIOS (1701), created one partition for ML and one for Win (Win partition is still blank), installed Mountain Lion and loaded the latest DSDT by MrEngels (http://www.tonymacx86.com/dsdt/85383-dsdt-asus-p8z77-m-pro-9.html) via latest Multibeast.

Problems I could not solve:
1- With no USB plugged-in, if I boot I can’t access anything (says “no boot device” error). Why?

2- I set iGPU in BIOS (no way I could launch ML with Nvidia) but even so I can start only with -x option and get safe mode.
From there, what should I do to install Nvidia card so I can boot with no option?

3-Aside from loading the DSDT above, should I do anything else with Multibeast?

Thanks in advance!
 
Hello,
Anyone has an idea why i can't boot with GraphicsEnabler=Yes??
If i boot like this it (seems to) boots fast & I get to a messed up screen.
Booting with GE=No it gets slow but it works. Appart from this, flash doesn't work well (not at all inside safari and firefox), screen saver is odd, not fluid. Also when it sleeps the screen turns white (or light grey) instead of turning off...

Note that i have a modded bios & and 'im using the last Chimera (which is supposed to help with hd4000).

I feel lost in my troubleshooting. Any help would be very very much appreciated.
 
Reply to my own question. I did a fresh install after collectings infos on the BIOS settings. I messed with those and succeed. I'll post a thread on how i got fully working hd4000 + wake sleep on my mobo.
I have no clue about the 10.8.3 update yet.
 
FabCa said:
Reply to my own question. I did a fresh install after collectings infos on the BIOS settings. I messed with those and succeed. I'll post a thread on how i got fully working hd4000 + wake sleep on my mobo.
I have no clue about the 10.8.3 update yet.
Click to expand...

Thanks, I would really appreciate that as I am currently stuck.

P8Z77-V LK + i5 3570K
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top