- Joined
- Aug 21, 2011
- Messages
- 402
- Motherboard
- GA-Z97N-WIFI
- CPU
- i7-4790K
- Graphics
- HD4600
- Mac
- Classic Mac
- Mobile Phone
tested with MacPro3,1; sleep mode is working (one-click wake-up)
my set-up
Gigabyte Z68MA-D2H-B3 UEFI U1B, 4GB x4, Core i5 2500k, Gigabyte GT640, monitor connected to the DVI port (the one below the HMDI port)
Antec EarthWatt 500W
set-up
(1) bios setup, press F7 load the optimised settings, changed SATA Port from IDE to AHCI
(2) boot from USB unibeast mountain lion 1.5.2, default boot settings, just enabled the -v verbose mode, boot up at full resolution (1920x1200)
(3) complete the mountain lion installation
(4) boot from USB drive again, select the HDD mountain lion partition
(5) run the multi-beast 4.6.1, installed the required drivers and the boot loader
(6) reboot from the HDD, use GraphicsEnabler=No PCIRootUID=0
(7) done
tested
(1) sleep mode, ok
(2) DVD Player, ok no error
(3) dual monitors (DVI + HDMI), ok
measured system power consumption (exclude the LCD monitor)
idle - ~52W average
sleep mode - 4W
CPU full load (cinebench CPU test) - 113W maximum
GPU full load (cinebench GPU test) - 99W maximum
cinebench ~ 39.x fps
compared with Intel HD3000
idle - ~37W average
CPU full load (cinebench CPU test) - 98W maximum
GPU full load (cinebench GPU test) - 60W maximum
cinebench ~ 10fps
and Radeon HD6670
idle - ~65W average
CPU full load (cinebench CPU test) - 125W maximum
GPU full load (cinebench GPU test) - 105W maximum
9600GT
idle - ~72W average
CPU full load (cinebench CPU test) - 128W maximum
GPU full load (cinebench GPU test) - 117W maximum
Does your boot.plist include PCIRootUID=0?
Did you have any noted problems during the first boot (white screen)?