MacOS Ventura x299 Thread
- Thread starter poshook
- Start date
- Joined
- May 2, 2018
- Messages
- 4
- Motherboard
- Asus Strix X299-e Gaming
- CPU
- i7-7820X
- Graphics
- RX 5700 XT
- Mac
- Mobile Phone
- Joined
- May 10, 2012
- Messages
- 146
- Motherboard
- Asus X299 PRO/SE
- CPU
- i9-10920X
- Graphics
- 6900XT, W6600, W6800
- Mac
I have installed it from scratch on a separate disk.
Here are the observations. During installation and during boot until the login screen comes up it looses display. You may think it is stuck, but it just looses the screen.
I can only see the SSD where Ventura is installed. No Other SSD's are seen in Disk utility or in finder. When inspecting the Ioregistry explorer I can see that there are no drivers loaded for those SSD's except the one on which Ventura is installed.
Here are the observations. During installation and during boot until the login screen comes up it looses display. You may think it is stuck, but it just looses the screen.
I can only see the SSD where Ventura is installed. No Other SSD's are seen in Disk utility or in finder. When inspecting the Ioregistry explorer I can see that there are no drivers loaded for those SSD's except the one on which Ventura is installed.
- Joined
- Dec 23, 2020
- Messages
- 41
- Motherboard
- Gigabyte X299 Designare EX-F7e
- CPU
- i9-10940X
- Graphics
- RX 6900 XT
- Mac
- Mobile Phone
I was able to update to Ventura on my system. Running OC 0.8.6 and it went smooth, 3.86GB download, and multiple reboots, with install wait time... I changed the wallpaper, bad color choices on Apple's part...
Feartech
Moderator
- Joined
- Aug 3, 2013
- Messages
- 32,472
- Motherboard
- Asus N752VX-OpenCore
- CPU
- i7-6700HQ / HM170
- Graphics
- HD 530 1920 x 1080
- Mac
- Mobile Phone
not much to go on with just an image, upload your zipped efi so someone can take a look
Feartech
Moderator
- Joined
- Aug 3, 2013
- Messages
- 32,472
- Motherboard
- Asus N752VX-OpenCore
- CPU
- i7-6700HQ / HM170
- Graphics
- HD 530 1920 x 1080
- Mac
- Mobile Phone
you really should be setting up Catalina first, then you can do this correctly:
The New Beginner's Guide to USB Port Configuration
Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...
www.tonymacx86.com
then try upgrading after