Contribute
Register

HELP installing Monterey on Dell Optiplex 3070 Micro

Status
Not open for further replies.
General → Advanced Boot Options: uncheck System Configuration → SATA Operation: AHCI Secure Boot → Secure Boot Enable: Disabled Intel® Software Guard Extensions™ → Intel® SGX™ Enable: Disabled Power Management → Block Sleep: check Virtualization Support → VT for Direct I/O: uncheck
Only these bios settings are available
assume you have set those as required as per previous post?
 
remove:
EFICheckDisabler.kext
RTCMemoryFixup.kext

PCiRoot(0x0/Pci(0x2,0x) should be: PciRoot(0x0)/Pci(0x2,0x0)
 
assume you have set those as required as per previous post?
identified serial port on ACPI device = UAR1 is the new error after bios settings
 
identified serial port on ACPI device = UAR1 is the new error after bios settings
as i already mentioned above, serial ports needs to be disabled in your bios
 
I've never owned a 3070 but it's likely that Dell has hidden some BIOS / UEFI settings. CFG should be unlocked and DVMT increased to 64MB. These are pretty much mandatory for any Dell that you run Monterey on. Other settings can be discovered too.

 

Attachments

  • image.png
    image.png
    49.2 KB · Views: 31
Status
Not open for further replies.
Back
Top