- Joined
- May 21, 2011
- Messages
- 405
- Motherboard
- Lenovo m90q Tiny
- CPU
- i7-10700
- Graphics
- UHD 630
- Mac
Specs
32 Go, mémoire DDR4, 2 933 MHz
2xSSD 1TB WD Black SN750
Carte graphique NVIDIA® GeForce RTX 3080, 16Go GDDR6 (Disabled -wegnoegpu)
NIC Killer Ethernet E3100X 10/100/1000Mbit/s/2,5Gbit/s
Wi-Fi 6 AX1650 (802.11ax) 2x2 LAN sans fil et Bluetooth 5.1
Intel® Core i7-10870H
17,3" FHD (1920x1080) 144Hz
Hi,
This isn't my first hackintosh but I must admit i'm kind of stuck. I attached my EFI. I followed the OpenCore Guide.
I used at first like recommeded by the guide 0x3EA50009 but I had the feeling I was stuck in verbose mode because of a black screen. The last verbose line was half printed, it felt like it.
I went on and tried 0x3EA50009 but added device-id 0x01234567 and I ended up there
```
IOControlUsers: gIOScreenLockState 3, ...
```
Any help would be very appreciated
Also, when OpenCore guide mentions a quirk for Dell, I should assume it's true for Alienware too, right?
32 Go, mémoire DDR4, 2 933 MHz
2xSSD 1TB WD Black SN750
Carte graphique NVIDIA® GeForce RTX 3080, 16Go GDDR6 (Disabled -wegnoegpu)
NIC Killer Ethernet E3100X 10/100/1000Mbit/s/2,5Gbit/s
Wi-Fi 6 AX1650 (802.11ax) 2x2 LAN sans fil et Bluetooth 5.1
Intel® Core i7-10870H
17,3" FHD (1920x1080) 144Hz
Hi,
This isn't my first hackintosh but I must admit i'm kind of stuck. I attached my EFI. I followed the OpenCore Guide.
I used at first like recommeded by the guide 0x3EA50009 but I had the feeling I was stuck in verbose mode because of a black screen. The last verbose line was half printed, it felt like it.
I went on and tried 0x3EA50009 but added device-id 0x01234567 and I ended up there
```
IOControlUsers: gIOScreenLockState 3, ...
```
Any help would be very appreciated
Also, when OpenCore guide mentions a quirk for Dell, I should assume it's true for Alienware too, right?
Attachments
Last edited: