Gigabyte Z490 Vision D (Thunderbolt 3) + i5-10400 + AMD RX 580

[Ghostmac1969]

Please click here and enter your CPU, Graphics and Motherboard information. This is required when asking for help.

In the image of your board, I see only one NVMe slot (Item 7). Are there any other NVMe slots? If so, please out their item numbers.

Sorry, I didn't update my system data as I was already buying all the components, but now I'm ready

I modified the attached image

 

[CaseySJ]

Sorry, I didn't update my system data as I was already buying all the components, but now I'm ready

I modified the attached image

• Oh yes, that a vertical mounting NVMe slot and it's labeled M_2_1.
• The other is labeled M_2_2.

The one closest to the CPU socket is the vertical one, M_2_1.

 

[Ghostmac1969]

• Oh yes, that a vertical mounting NVMe slot and it's labeled M_2_1.
• The other is labeled M_2_2.

The one closest to the CPU socket is the vertical one, M_2_1.

Thank you. I'm building my 1st Hackintosh with these components:
a. Motherboard: ASUS WS SAGE / 10G
b. Processor: INTEL i9-10940X
c. Cooling: AIO CORSAIR H150i PRO RGB
d. RAM: CORSAIR VENGEANCE LPX 3200 C16 4X32GB
d. MacOS SSD: Sabrent Rocket 1TB NVMe
f. Windows 10 SSD: Sabrent Rocket 1TB NVMe
g. Graphics card: SAPPHIRE RADEON VII
h. WiFi / BT card: MQUPIN FENVI T919 BCM94360CD
h. TB3 Sheet: GIGABYTE TITAN RIDGE
i. NVMe to PCIe SSD Adapter Card: 2 x EZDIY-FAB PCI Express M.2 SSD NGFF PCIe Card to PCIe 3.0 x4 Adapter (storage solution with 2 x Sabrent Rocket Q 4TB SSD to put in RAID 0 configuration)
l. Power supply: LEADEX II 80 Plus Gold 1200 W
m. case: COOLER MASTER c700p

I would like to create a dual boot system in OC - which I have studied for a long time but without any previous experience - and I cannot find a complete guide to set up dual boot. Could you suggest me one?

 

[CaseySJ]

Thank you. I'm building my 1st Hackintosh with these components:
a. Motherboard: ASUS WS SAGE / 10G
b. Processor: INTEL i9-10940X
c. Cooling: AIO CORSAIR H150i PRO RGB
d. RAM: CORSAIR VENGEANCE LPX 3200 C16 4X32GB
d. MacOS SSD: Sabrent Rocket 1TB NVMe
f. Windows 10 SSD: Sabrent Rocket 1TB NVMe
g. Graphics card: SAPPHIRE RADEON VII
h. WiFi / BT card: MQUPIN FENVI T919 BCM94360CD
h. TB3 Sheet: GIGABYTE TITAN RIDGE
i. NVMe to PCIe SSD Adapter Card: 2 x EZDIY-FAB PCI Express M.2 SSD NGFF PCIe Card to PCIe 3.0 x4 Adapter (storage solution with 2 x Sabrent Rocket Q 4TB SSD to put in RAID 0 configuration)
l. Power supply: LEADEX II 80 Plus Gold 1200 W
m. case: COOLER MASTER c700p

I would like to create a dual boot system in OC - which I have studied for a long time but without any previous experience - and I cannot find a complete guide to set up dual boot. Could you suggest me one?

Good set of components. I would only caution against Corsair H150i Pro RGB because it may cause sleep problems unless the USB port is deactivated in a USB port map. Might be good to search this site to see if this AIO cooler is okay to use.

Regarding dual boot, there's nothing special needed in the OpenCore setup. Windows is installed independently of OpenCore. We use Microsoft Media Creation Tool to build a USB install disk for Windows 10, which handles the complete task. We should do this before install macOS.

OpenCore is first and foremost used to boot macOS. It will auto-detect and let you boot Windows as well. So nothing has to be done other than configuring it for macOS.

 

[lightmanrt]

I need some help. Does the i7-10700k run extremely hot? If I let it run at 4700GHz the temp in bios is 38°C. If I enable enhanced core it boots as 5100GHz but the temp is 55°C. I have the temp warning in bios set at 80 degrees. When booting into Catalina, the computer keeps sounding the temperature warning for 80°. Once it is past the login-screen it continues to sound the alarm until everthing loads. If I render in Premiere Pro, it constantly sounds the alarm. My cooling is a Corsair iCUE H150i RGB PRO XT Liquid CPU Cooler. Gigabyte Vision D. i7-10700k. The i9-9000kf never ran that hot. I checked to see if the heat sink is properly seated and if the thermal paste is distributed properly. All seems ok.

 

[dehjomz]

I need some help. Does the i7-10700k run extremely hot? If I let it run at 4700GHz the temp in bios is 38°C. If I enable enhanced core it boots as 5100GHz but the temp is 55°C. I have the temp warning in bios set at 80 degrees. When booting into Catalina, the computer keeps sounding the temperature warning for 80°. Once it is past the login-screen it continues to sound the alarm until everthing loads. If I render in Premiere Pro, it constantly sounds the alarm. My cooling is a Corsair iCUE H150i RGB PRO XT Liquid CPU Cooler. Gigabyte Vision D. i7-10700k. The i9-9000kf never ran that hot. I checked to see if the heat sink is properly seated and if the thermal paste is distributed properly. All seems ok.

What voltage do you have applied? Mine runs cools 35 degrees at idle @ 5.1 GHz. Kraken z63. Voltage 1.32. I haven’t tried any lower voltages.

 

[sambear]

@sambear the same happend to me. The process crashed at first try and now I get the same error message that you posted. The system is still bootable but RGB Fusion 2.0 isn't working anymore. The RGBs light up white. I don't recommend trying it right now.

I just opened a ticket at Gigabyte's website about it.

Is the system bootable?

Yes,both mac/win system is still bootable / onboard RGB isn't working anymore, I also opened a ticket at Gigabyte's website.

@one07 please share any imformation If you got sloutions from gigbyte support,Thanks

 

[Josu]

In my country 0 stock of Vision D, are there big difference between Vision G? i am not really worried about any thunderbold device, but unfortunatelly i am new in this tech and for me will be easier to follow straight forward guide (I mean for Vision-D)

 

[one07]

Yes,both mac/win system is still bootable / onboard RGB isn't working anymore, I also opened a ticket at Gigabyte's website.

@one07 please share any imformation If you got sloutions from gigbyte support,Thanks

My system is doing a cold double boot after every shutdown now. Thank god it's still booting... I'll keep you updated but won't try anything for now. Let's see what Gigabyte will reply.

 

[generational]

The only one problem I seem to have is that the fan sensor readings stop working after deep sleep/wake.