Gigabyte Z390 M Gaming build with working NVRAM

[pastrychef]

Hey @pastrychef! I somehow screwed up my USB, I think? A few of my ports work, and I have the 10.15.x USB patches, but most of them don't and when I plug in a USB stick to one I get the attached console messages.

I've attached my EFI. Thanks, man! Love this build.


EDIT: Just tested some more. I could get that USB stick to mount, but it took a good 60 seconds to show up. Just put in a USB SD card reader, got no mount no nothing.

You are not using my EFI. Try the EFI from post #1.

Your EFI has stuff that I don't use such as emulated NVRAM.

 

[bam2000]

Test with mine.
Check if your have and remove :

1. All kexts with in name "USB"
2. ACPI patch :
   1. SSDT-USB.aml
   2. SSDT-UIAC.aml
3. Patch in config.plist :
   1. USB Port Limit Patch 1
   2. USB Port Limit Patch 2
4. Clean NVRAM :
   1. Clover : sudo nvram -c (If your have warning its okey)
   2. OpenCore : clean NVRAM on boot

Thanks, its now sleeping, but my Bluetooth is not working (I guess the used USB port is disabled in your kext) and my USB 3 Hubs and USB 3.1 Hubs are recognised as USB 2 480mbit

 

[YukiPowa]

Change your Bluetooth port, F_USB1 to F_USB2 (or edit plist in kext)
And for your USB 3 Hubs and USB 3.1 Hubs, i not idea
Where you see it ?

 

[bam2000]

Change your Bluetooth port, F_USB1 to F_USB2 (or edit plist in kext)
And for your USB 3 Hubs and USB 3.1 Hubs, i not idea
Where you see it ?

tried editing the Plist in Kext, because I cannot easy change the Port (water-cooled radiator in front of the port )
But no success, the Bluetooth is connected to HS10 Port, and this one is green in Hackintool, so should work. I guess still over the limit of 15 ports....

I Need the following USB ports for my Gigabyte Z390M Motherboard:
Usb mapping

Usb 3 front

Ss05 hs05
Ss06 hs06

Usb 3 backports

Usb 3 usb 2
Ss04 Hs04
Ss03 Hs03

Usb 3.1 backports

Ss01 hs01
Ss02 hs02

Usb 2 backports

Hs08
Hs07

Usb 2 header
Hs10

its in Hackintool see attachment

 

[pastrychef]

tried editing the Plist in Kext, because I cannot easy change the Port (water-cooled radiator in front of the port )
But no success, the Bluetooth is connected to HS10 Port, and this one is green in Hackintool, so should work. I guess still over the limit of 15 ports....

I Need the following USB ports for my Gigabyte Z390M Motherboard:
Usb mapping

Usb 3 front

Ss05 hs05
Ss06 hs06

Usb 3 backports

Usb 3 usb 2
Ss04 Hs04
Ss03 Hs03

Usb 3.1 backports

Ss01 hs01
Ss02 hs02

Usb 2 backports

Hs08
Hs07

Usb 2 header
Hs10

its in Hackintool see attachment

Right-click and remove HS08, SS07, and SS08.

 

[YukiPowa]

tried editing the Plist in Kext, because I cannot easy change the Port (water-cooled radiator in front of the port )
But no success, the Bluetooth is connected to HS10 Port, and this one is green in Hackintool, so should work. I guess still over the limit of 15 ports....

I Need the following USB ports for my Gigabyte Z390M Motherboard:
Usb mapping

Usb 3 front

Ss05 hs05
Ss06 hs06

Usb 3 backports

Usb 3 usb 2
Ss04 Hs04
Ss03 Hs03

Usb 3.1 backports

Ss01 hs01
Ss02 hs02

Usb 2 backports

Hs08
Hs07

Usb 2 header
Hs10

its in Hackintool see attachment

Else send your EFI

 

[bam2000]

Else send your EFI

Right-click and remove HS08, SS07, and SS08.

When I remove these entries and save the Kext, I can't get the Mac to sleep anymore

@YukiPowa
here is my EFI folder:

 

[pastrychef]

When I remove these entries and save the Kext, I can't get the Mac to sleep anymore

@YukiPowa
here is my EFI folder:

HS01-HS06 are set to connector type 0. They should be connector type 3.

 

[jbarnette]

@pastrychef Dude do you know how this is even possible? I have 10.15.4 booted up with a RTX 2080 Super installed!!!! This shouldn't work it has never worked before. Had the card in doing some testing in Windows, and I forgot to take out out this morning when booted up in to macOS. I'm sitting here typing this on a 4K display connected to the RTX 2080 Super!!!! Was some kinda of base driver added int he last update? It just shows as "Display 33mb".

 

[YukiPowa]

@pastrychef Dude do you know how this is even possible? I have 10.15.4 booted up with a RTX 2080 Super installed!!!! This shouldn't work it has never worked before. Had the card in doing some testing in Windows, and I forgot to take out out this morning when booted up in to macOS. I'm sitting here typing this on a 4K display connected to the RTX 2080 Super!!!! Was some kinda of base driver added int he last update? It just shows as "Display 33mb".

MMh okey but you are 33 MB of memory haha