Contribute
Register

The everything works Asus Z390-I Gaming * i7-8700K * SAPPHIRE NITRO+ Radeon RX Vega 64 Build

Thanks for your great post but may I ask a question?
I'm using your DGPU-EFI and I wonder why there is a DSDT-or.aml and DSDT-pa0.aml , is it working or I can just delete them?
Because you have done some DSDT change in clover's config.plist why you don't do them all there?
 
Last edited:
Also, I meet with a problem just now my internal microphone not working with no sound input, but my audio output works well. I have the same motherboard and save AppleALC layout with you. Does your microphone work?
 
Do I need more than the BRCM Bluetooth Kext ?
I put it in .../other/ folder, but I didn't see anything.
 
Hi ModMike! Thanks for your great work. I installed macOS successfully. Everything works! Except WiFi and Bluetooth because I didn't change the native onboard. I'm planning to do it in the future. But now I'd like to use my dongle Bluetooth adapter. I inserted but it didn't work. I have two - Orico CSR8510 A10 and the second NONAME. I used them successfully on my previous hack with Mojave 10.14.5. Do I can use one of them on this build? Do I need to make any changes in config or just add or remove any kexts? I'd be very thankful for your help.
 

Attachments

  • IMG_0941.jpg
    IMG_0941.jpg
    4.2 MB · Views: 78
  • IMG_4353.jpg
    IMG_4353.jpg
    4.7 MB · Views: 54
  • IMG_3829.jpg
    IMG_3829.jpg
    4.4 MB · Views: 48
  • IMG_9665.jpg
    IMG_9665.jpg
    4.4 MB · Views: 46
andredezigner said:
successfully. Everything works! Except WiFi and Bluetooth because I didn't change the native onboard. I'm planning to do it in the future. But now I'd like to use my dongle Bluetooth adapter. I inserted but it didn't work. I have two - Orico CSR8510 A10 and the second NONAME. I used them successfully on my previous hack with Mojave 10.14.5. Do I can use one of them on this build? Do I need to make any changes in config or just add or remove any kexts? I'd be very thankful for your help.
Click to expand...
You should be able to but the EFI folder @ModMike posted have kexts in Clover/Kexts/ Other that are meant to enable the DW1516 card. They are probably conflicting with what ever your dongle need because many run without drivers. Frankly whatever you needed to make them work on your last machine is going to be the same so approach it that way. If they ran natively then removing kexts is as easy as mounting the EFI partition using Clover Configurator and then navigating to Clover/ Kexts/ Other and deleting the ones that start BRCM. See screen shot.

Kexts.png
 
FerVlucht said:
Do I need more than the BRCM Bluetooth Kext ?
I put it in .../other/ folder, but I didn't see anything.
Click to expand...
You seem to have a different board, did you change the WiFi/Bluetooth card?
 
yup, i changed the wifi card to DW1560
 
Hey, Hello and I had a question, after installing Mojave (which works) what is the way to put Catalina, because I try with EFI catalina, but I can not, I still have a black screen at the end :( is that what you get there bye and good night.
 
Hackintosh 1.0
ROG STRIX Z390-I GAMING |  i7 9700K |  Vega 64 8GB
patrickhocman said:
Hey, Hello and I had a question, after installing Mojave (which works) what is the way to put Catalina, because I try with EFI catalina, but I can not, I still have a black screen at the end :( is that what you get there bye and good night.
Click to expand...
Hello there
Is your problem solved? My configuration is 1660V3+R5E+RX580
Also at the end of the black screen.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top