- Joined
- Apr 21, 2016
- Messages
- 1,005
- Motherboard
- ASUS X556UA-Clover
- CPU
- i5-6200U
- Graphics
- HD 520,1366x768
- Mobile Phone
Do you really need all those boot-flags? Clean those up. You may want to use RehabMan's config.plist (matching your graphics) as a start. I'd use the UHD 630 config for your device actually. It contains necessary fixes for a correctly-working system. Disable the ig-platform-id injection there, let WEG do it for you (the id there is for the UHD 630, other things should be good).Sill no luck
Fresh DSDT extract, win10 patch and then polling mode mods (ensuring all returns are SBFB in the _CRS methods for TPD0).
Attached new debug pack.
Update Clover to the latest revision from SourceForge.
Make sure kexts are installed accordingly to InjectKexts=Detect configuration.
All kexts should be installed to /L/E. Mandatory kexts necessary for booting also go to Clover (while you still have them in /L/E)
AptioMemoryFix is usually preferred over OsxAptioFixDrv, replace it.
FSInject missing from drivers64Uefi. Running the Clover installer will probably put it there. You can also choose AptioMemoryFix within the installer, make sure you remove OsxAptio... tho.
Last edited: