- Joined
- Nov 20, 2012
- Messages
- 7
- Motherboard
- GA-Z390 UD
- CPU
- i7-8700
- Graphics
- R9-380
- Mac
- Mobile Phone
MB Gigabyte Z390 UD 300 Series
CPU Intel i7-8700 with fan that came with it.
Ram (4) 8gb 2133 pc4 17000 ddr4 for 32gb total
Video Amd 7950 Vapor-x 3gb using Dual HP W2071d (20 in.) monitors
OSX 10.14.4 on 240gb Intel SSD 545s
700W EVGA PS
Bios setup:
Load Optimized defaults
Bios:
Windows 8/10 Features=Other OS
Peripherals:
Super I/O--Disable serial port
USB Configuration-XHCI Handoff=Enabled
Chipset:
VT-d=disabled
I had a problem with the UniBeast Install. I would get to the "13 min left in install" about 20 seconds after this the machine would reboot. At first I thought this was normal--however after rebooting 4 or 5 times with no forward progress I realized this was not normal. I played with it for a couple of days. I also tried another SSD with the same results.
Finally I just booted a SuperDuper backup of 10.14.4 to the SSD i was trying to install to and the system came up fine. ?????
Anyway after that all was as normal.
I do have one minor problem---when I shut down Mojave my motherboard keeps re-booting. If anyone knows how to get it to just shutdown I would like to here the solution please.
I have another SSD in the mail, I will try again. Does anyone have a solution for the constant re-booting.
The new SSD will not install either but will work fine with a superduper restore???
Thanks
Hackintoshboy
4-26-19 Today I discovered none of my usb 3.0 ports work. I tried 3rd party usb and usbinjectall. no luck
Has anybody got usb rear panel to work on mojave 14.4 for this MB???
4-27-19 Thank You jbarnette for your stated fix of OsxAptioFix2Drv-free2000.efiplus USBInjectall and Remove XHCI USB port limit
All of my USB ports now work and my machine shuts down without re-booting
I now have a completely working Mojave 10.14.4 on my Gigabyte Z390 UD MB.
Tech support--This fix works great--pass it along to all Z390 UD owners and add to Unibeast install.
CPU Intel i7-8700 with fan that came with it.
Ram (4) 8gb 2133 pc4 17000 ddr4 for 32gb total
Video Amd 7950 Vapor-x 3gb using Dual HP W2071d (20 in.) monitors
OSX 10.14.4 on 240gb Intel SSD 545s
700W EVGA PS
Bios setup:
Load Optimized defaults
Bios:
Windows 8/10 Features=Other OS
Peripherals:
Super I/O--Disable serial port
USB Configuration-XHCI Handoff=Enabled
Chipset:
VT-d=disabled
I had a problem with the UniBeast Install. I would get to the "13 min left in install" about 20 seconds after this the machine would reboot. At first I thought this was normal--however after rebooting 4 or 5 times with no forward progress I realized this was not normal. I played with it for a couple of days. I also tried another SSD with the same results.
Finally I just booted a SuperDuper backup of 10.14.4 to the SSD i was trying to install to and the system came up fine. ?????
Anyway after that all was as normal.
I do have one minor problem---when I shut down Mojave my motherboard keeps re-booting. If anyone knows how to get it to just shutdown I would like to here the solution please.
I have another SSD in the mail, I will try again. Does anyone have a solution for the constant re-booting.
The new SSD will not install either but will work fine with a superduper restore???
Thanks
Hackintoshboy
4-26-19 Today I discovered none of my usb 3.0 ports work. I tried 3rd party usb and usbinjectall. no luck
Has anybody got usb rear panel to work on mojave 14.4 for this MB???
4-27-19 Thank You jbarnette for your stated fix of OsxAptioFix2Drv-free2000.efiplus USBInjectall and Remove XHCI USB port limit
All of my USB ports now work and my machine shuts down without re-booting
I now have a completely working Mojave 10.14.4 on my Gigabyte Z390 UD MB.
Tech support--This fix works great--pass it along to all Z390 UD owners and add to Unibeast install.
Last edited: