- Joined
- Jul 23, 2013
- Messages
- 123
- Motherboard
- Razer Blade 15 (2018)
- CPU
- I7-8750H
- Graphics
- GTX 1070HQ
- Mac
- Classic Mac
- Mobile Phone
Hi all,
I've been working through this guide the last day or so to get my USB working properly on my desktop (Z97a in my bio). I think I have reached a point where I have a basic understanding of what is going on, but I have reached a snag.
I have tried the guide using both FakePCIID_XHCIMux and without it. When using it, it does reroute my USB2 to EH01, but it does not route my internal USB2 headers anywhere, so my bluetooth does not work. I have the list of ports from port discovery here:
(xhcimux) EH01-HUB01 - PR11
HS12 - bluetooth (usb2 internal)
HS13 - usb2 top right
HS14 - usb2 top left
HS10/SS06 - usb3 mid left
HS09/SS05 - usb3 mid right
HS04/SS04 - usb3 bottom left
HS03/SS03 - usb3 bottom right
HS05 - usb2 internal
HS06 - usb2 internal
HS07 - usb2 internal
HS08 - usb2 internal
HS01/SS01 - usb3 frontpanel
HS02/SS02 - usb3 frontpanel
It seems like using XHCIMux to reroute my USB2 to EH01 seems like the best bet to stay under the port limit, but I can't figure out where the internal header ports went and how to fix that. If I could reroute some to EH01 and then keep the internal headers on XHC, I think that would work best from my understanding.
I have attached my debug files (this is without FakePCIID_XHCIMux).
I've been working through this guide the last day or so to get my USB working properly on my desktop (Z97a in my bio). I think I have reached a point where I have a basic understanding of what is going on, but I have reached a snag.
I have tried the guide using both FakePCIID_XHCIMux and without it. When using it, it does reroute my USB2 to EH01, but it does not route my internal USB2 headers anywhere, so my bluetooth does not work. I have the list of ports from port discovery here:
(xhcimux) EH01-HUB01 - PR11
HS12 - bluetooth (usb2 internal)
HS13 - usb2 top right
HS14 - usb2 top left
HS10/SS06 - usb3 mid left
HS09/SS05 - usb3 mid right
HS04/SS04 - usb3 bottom left
HS03/SS03 - usb3 bottom right
HS05 - usb2 internal
HS06 - usb2 internal
HS07 - usb2 internal
HS08 - usb2 internal
HS01/SS01 - usb3 frontpanel
HS02/SS02 - usb3 frontpanel
It seems like using XHCIMux to reroute my USB2 to EH01 seems like the best bet to stay under the port limit, but I can't figure out where the internal header ports went and how to fix that. If I could reroute some to EH01 and then keep the internal headers on XHC, I think that would work best from my understanding.
I have attached my debug files (this is without FakePCIID_XHCIMux).
Attachments
Last edited: