Gigamaxx
Moderator
- Joined
- May 15, 2016
- Messages
- 6,532
- Motherboard
- GIGABYTE X470 Arous Gaming 7 WiFi
- CPU
- Ryzen R9 3900X
- Graphics
- RX 480
- Mac
It's a Legacy boot only setup, yes, the EP45T-UD3LR is pretty ancient, it's a P45 + ICH10R Chipset.
I believe I'm using a Clover legacy build - in that, I'm asking Unibeast to create me a Legacy mode boot disk, which is the same thing, right?
Right now, I swapped back to my old GTX260 as I'm having no luck, despite trying all sorts of configurations. The best I can get is booted into a desktop, but with a black screen.
The thing I find really odd is still that remote desktop'ing into the box shows it recognises the card and all *three* attached screens (I've tried it with anything from 1 upwards with the same result).
Also, when I leave the machine with a black screen, it actually sleeps the attached monitors, hitting return wakes up the connected screens - but they stay black.
It's like the OS knows the screens are attached but just won't use them :\
DID you rebuild caches when you installed kexts to System/Library/Extensions?
If you did not install there and only have them in Clover/Kexts/Other folder then you want to set Clover system parameters to inject kexts and not detect. Post your config.plist