[Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

[anvil14]

You might have forgotten to update your config.plist.

You're right I did forget to update my config.plist. I just did and rebooted everything seems to be working ok. I'll report back if the random reboot re-appear.

 

[stirlingengine]

Can not boot up correctly with dual monitor(2k with hdmi and 1080p with type c->dp).Single monitor worked fine and it also worked that I connected the other monitor after boot up.
But both monitor connected before boot:
- clover with incorrect resolution.
- After apple logo the screen turns black.

----------
I found something might related to this issue. I guess I should set correct value at Graphics part of config.plist.

 

[stef72]

Hi,
i just to thank rehabman for his Nuc guide.
I've just updated my Nuc 5 to new Nuc 8 and everything is working well.
stef

 

[Ejic]

Hi,
i just to thank rehabman for his Nuc guide.
I've just updated my Nuc 5 to new Nuc 8 and everything is working well.
stef

Can you please share your config.plist. I am a total newbie, tried to follow the guide and I think my problem is in the config.plist (just mask your serial with 0s). Thank you in advance!!

Getting kernel panic thats related to iGPU every time ....

 

[RehabMan]

Can not boot up correctly with dual monitor(2k with hdmi and 1080p with type c->dp).Single monitor worked fine and it also worked that I connected the other monitor after boot up.

You might have a different result with SSDT_CFLALT.aml.

But you failed to attach any problem reporting files (read post #1), so maybe you have something wrong...

- clover with incorrect resolution.

Normal.

- After apple logo the screen turns black.

Normal.

 

[RehabMan]

Can you please share your config.plist. I am a total newbie, tried to follow the guide and I think my problem is in the config.plist (just mask your serial with 0s). Thank you in advance!!

Getting kernel panic thats related to iGPU every time ....

Read post #1.
If you have an issue, you must attach problem reporting files (again, read post #1).

 

[matthias1234]

Short news from my Projekt:

- after a few new Installations I got macOS 10.14.1 installed
- at the Beginning i have many random reboots (most when I try enable iCloud)
- with the new files from RehabMan all looks fine at the Moment, but still testing
- I have changed system definition to Mac mini 2018, still all runs fine

- the only thing what is Not so Fine at the Moment: the CPU only Go Down to 1300 MHz and not to 800 and Boost go to 4200 and not to 4500

 

[stirlingengine]

You might have a different result with SSDT_CFLALT.aml.

But you failed to attach any problem reporting files (read post #1), so maybe you have something wrong...



Normal.



Normal.

Sorry I didn't read through the whole post. Reporting files's been attached. Thanks RehabMan!

 

[RehabMan]

Can not boot up correctly with dual monitor(2k with hdmi and 1080p with type c->dp).Single monitor worked fine and it also worked that I connected the other monitor after boot up.
But both monitor connected before boot:
- clover with incorrect resolution.
- After apple logo the screen turns black.

Sorry I didn't read through the whole post. Reporting files's been attached. Thanks RehabMan!

Your current setup is correct (other than trying SSDT_CFLALT.aml).

I found something might related to this issue. I guess I should set correct value at Graphics part of config.plist.

You guess wrong.
This guide does not use Clover config.plist/Graphics for injection.
It uses a combination of ACPI and config.plist/Devices/Properties.

 

[RehabMan]

Short news from my Projekt:

- after a few new Installations I got macOS 10.14.1 installed
- at the Beginning i have many random reboots (most when I try enable iCloud)
- with the new files from RehabMan all looks fine at the Moment, but still testing
- I have changed system definition to Mac mini 2018, still all runs fine

- the only thing what is Not so Fine at the Moment: the CPU only Go Down to 1300 MHz and not to 800 and Boost go to 4200 and not to 4500

Your profile has no hardware details.
Please fix as per rules and/or laptop FAQ.