- Joined
- Oct 15, 2018
- Messages
- 9
- Motherboard
- Asus P5K
- CPU
- E8500
- Graphics
- 9500GT
- Mobile Phone
Oh, okayssdtPRgen.sh has no support for your CPU.
Oh, okayssdtPRgen.sh has no support for your CPU.
This did not work for me on Mojave with i7 3770. CPU got stuck at 800 MHz. I had to remove the SSDT.aml file and disable speed step to get it back to normal frequencies.
Easiest way for Ivy is to ignore ssdtPRgen.sh entirely...
Instead:
- delete SSDT.aml if you already created it
- set config.plist/KernelAndKextPatches/KernelXCPM=true
- set config.plist/ACPI/SSDT/Generate/PluginType=true
- make sure you're not dropping OEM CPU SSDTs (eg. DropOem=false, no CPU SSDTs identified in DropTables)
CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 1600 MHz
CPU Maximum non-Turbo Frequency....: 3400 MHz
CPU Maximum Turbo Frequency........: 3900 MHz
IGPU Info:
------------------------------------
IGPU Current Frequency.............: 350 MHz
IGPU Minimum Frequency.............: 350 MHz
IGPU Maximum Non-Turbo Frequency...: 650 MHz
IGPU Maximum Turbo Frequency.......: 1150 MHz
IGPU Maximum limit.................: No Limit
CPU P-States [ (16) 35 38 ] iGPU P-States [ (7) ]
CPU C3-Cores [ 0 1 6 7 ]
CPU C6-Cores [ 0 1 2 4 7 ]
CPU C7-Cores [ 0 1 4 5 7 ]
CPU P-States [ (16) 26 35 38 ] iGPU P-States [ (7) ]
CPU C3-Cores [ 0 1 2 6 7 ]
CPU C6-Cores [ 0 1 2 4 5 6 7 ]
CPU C7-Cores [ 0 1 3 4 5 7 ]
CPU P-States [ 16 26 35 (37) 38 ] iGPU P-States [ (7) ]
CPU C3-Cores [ 0 1 2 3 5 6 7 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 16 26 34 35 (36) 37 38 ] iGPU P-States [ (7) ]
Looks like that works with Speed Step enabled! However, here's the output from cat /tmp/AppleIntelInfo.dat. I've manually enabled the multiplier to a max of 39. Does this look right?
Code:CPU Ratio Info: ------------------------------------ CPU Low Frequency Mode.............: 1600 MHz CPU Maximum non-Turbo Frequency....: 3400 MHz CPU Maximum Turbo Frequency........: 3900 MHz IGPU Info: ------------------------------------ IGPU Current Frequency.............: 350 MHz IGPU Minimum Frequency.............: 350 MHz IGPU Maximum Non-Turbo Frequency...: 650 MHz IGPU Maximum Turbo Frequency.......: 1150 MHz IGPU Maximum limit.................: No Limit CPU P-States [ (16) 35 38 ] iGPU P-States [ (7) ] CPU C3-Cores [ 0 1 6 7 ] CPU C6-Cores [ 0 1 2 4 7 ] CPU C7-Cores [ 0 1 4 5 7 ] CPU P-States [ (16) 26 35 38 ] iGPU P-States [ (7) ] CPU C3-Cores [ 0 1 2 6 7 ] CPU C6-Cores [ 0 1 2 4 5 6 7 ] CPU C7-Cores [ 0 1 3 4 5 7 ] CPU P-States [ 16 26 35 (37) 38 ] iGPU P-States [ (7) ] CPU C3-Cores [ 0 1 2 3 5 6 7 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 ] CPU C7-Cores [ 0 1 2 3 4 5 6 7 ] CPU P-States [ 16 26 34 35 (36) 37 38 ] iGPU P-States [ (7) ]
As far as CPU PM, looks good to me (assuming you verified X86PlatformPlugin).
You would only see x39 if there was only a single core active.
What's the X86PlatformPlugin? I haven't heard of that before or seen that in any of the guides
Found it. What should I verify there?Look for it in ioreg under CPU0.
Found it. What should I verify there?