- Joined
- Jun 15, 2012
- Messages
- 519
- Motherboard
- Gigabyte Z370 AORUS Gaming 7-F13
- CPU
- i7-8700K OC @ 5.1Ghz
- Graphics
- RX 6900 XT
- Mac
- Classic Mac
- Mobile Phone
I actually got back on F10 and tamed the beast. Some googling i realized why I could not get any of settings off auto. It's cause they don't have drop down menus. I was hitting enter, up and down arrows and getting no where. But you need to type numbers or hit + or - key for those areas.
So I got rid of auto and went to 50x package multiplier and set custom cvore and ran prime95 and aida stability tests in windows to refine until I got lowest possible vcore while maintaining stability. Now not only are temps back to F7 values while running F10, i got temps even LOWER than F7 values cause my cpu is stable at some pretty low vcore at 5ghz. I could probably push it to 5.1ghz actually but for time being I'm making a new baseline temperature for 5ghz so I can get a feel for this setup. Plus make sure it passes my 2 week, 4 week stability tests of general use. you can run aida for 2 hours and not crash. then crash opening textedit out of no where if a OC is only 99.97% stable. no test as good as the test of time.
So I got rid of auto and went to 50x package multiplier and set custom cvore and ran prime95 and aida stability tests in windows to refine until I got lowest possible vcore while maintaining stability. Now not only are temps back to F7 values while running F10, i got temps even LOWER than F7 values cause my cpu is stable at some pretty low vcore at 5ghz. I could probably push it to 5.1ghz actually but for time being I'm making a new baseline temperature for 5ghz so I can get a feel for this setup. Plus make sure it passes my 2 week, 4 week stability tests of general use. you can run aida for 2 hours and not crash. then crash opening textedit out of no where if a OC is only 99.97% stable. no test as good as the test of time.