- Joined
- Apr 6, 2017
- Messages
- 8
Hey everyone,
i'm encountering strange issues after updating my 9360 to latest bios (2.7.1) and 10.13.5, not sure if there is a hardware fault or my configuration is somehow messed up (slightly altered from this and other guides, using VoodooI2C etc.):
When i boot (whether auto login is enabled or not, ac plugged in or not) into OS X, once LoginWindow is loaded and ready to go (e.g. at login screen) the laptop just goes to sleep immediately after boot. i've also noticed i can't wake it up by opening the lid and brightness buttons are not working correctly recently (they've been working fine previously). once i wake it up from that initial sleep, it works "fine" again and won't behave strangely anymore (safe for the same no lid wakeup, no brightness buttons mentioned earlier).
pmset -g log indicates that the system receives a lid closed event on boot, which i don't understand at all. i've tried using DSDT with and without any lid patches. made no changes to my ssdts, maybe there's a problem there?
not putting any DSDT in patched/ results in the system not going to sleep after boot (no Clamshell Sleep event either), however the system also doesn't sleep at all, so presumably the DeepIdle patch won't work without a patched DSDT? not sure at this point, i'm pretty much going trial and error, obviously i am no ACPI expert.
also a note: this does not happen on windows.
yes i have re-extracted and patched DSDT after the BIOS updates, no changes however
shamelessly linking the (completely dead) thread i posted my diagnostic info on: https://www.insanelymac.com/forum/t...id-standby-issue-on-previously-working-setup/
also attached are a system.log from an affected boot and the corresponding pmset -g log from the boot.
i'm encountering strange issues after updating my 9360 to latest bios (2.7.1) and 10.13.5, not sure if there is a hardware fault or my configuration is somehow messed up (slightly altered from this and other guides, using VoodooI2C etc.):
When i boot (whether auto login is enabled or not, ac plugged in or not) into OS X, once LoginWindow is loaded and ready to go (e.g. at login screen) the laptop just goes to sleep immediately after boot. i've also noticed i can't wake it up by opening the lid and brightness buttons are not working correctly recently (they've been working fine previously). once i wake it up from that initial sleep, it works "fine" again and won't behave strangely anymore (safe for the same no lid wakeup, no brightness buttons mentioned earlier).
pmset -g log indicates that the system receives a lid closed event on boot, which i don't understand at all. i've tried using DSDT with and without any lid patches. made no changes to my ssdts, maybe there's a problem there?
not putting any DSDT in patched/ results in the system not going to sleep after boot (no Clamshell Sleep event either), however the system also doesn't sleep at all, so presumably the DeepIdle patch won't work without a patched DSDT? not sure at this point, i'm pretty much going trial and error, obviously i am no ACPI expert.
also a note: this does not happen on windows.
yes i have re-extracted and patched DSDT after the BIOS updates, no changes however
shamelessly linking the (completely dead) thread i posted my diagnostic info on: https://www.insanelymac.com/forum/t...id-standby-issue-on-previously-working-setup/
also attached are a system.log from an affected boot and the corresponding pmset -g log from the boot.
Attachments
Last edited: