Radeon RX 560 on 10.13.4 macOS High Sierra

[Gigamaxx]

Here's the config.plist. Maybe I'm missing something else there? Thanks for looking.

 

[elfcake]

Look
Looks like I sent the un-edited config, minus the Radeon De-init and the ig-platform-id to 0x59120001.

Everything else is the same.

I hope that makes sense?

 

[Gigamaxx]

Have you tried this? In bios set PEG as primary and leave multimonitor active and 64Mb allocated memory. Then remove inject intel and the ig ID. Use RX card and the kexts and see what happens.

 

[elfcake]

Have you tried this? In bios set PEG as primary and leave multimonitor active and 64Mb allocated memory. Then remove inject intel and the ig ID. Use RX card and the kexts and see what happens.

You see, that's the problem... I cannot access BIOS, CBM and I do not see the Apple load screen. It is all black screen until the Log In screen.

I have been looking through the forum but have yet to come across this problem.

 

[Gigamaxx]

You see, that's the problem... I cannot access BIOS, CBM and I do not see the Apple load screen. It is all black screen until the Log In screen.

Connect to the motherboard and make the switch then connect to the RX card after reboot. We used to have to use IGPU to get th RX cards to work in Sierra before WEGkext and rad deinit. That’s how we did it was either 2 monitors or. Dual input and switch from Mobo to vCard after boot. Now you can just set vCard as primary and see the whole boot process.

 

[elfcake]

Connect to the motherboard and make the switch then connect to the RX card after reboot. We used to have to use IGPU to get th RX cards to work in Sierra before WEGkext and rad deinit. That’s how we did it was either 2 monitors or. Dual input and switch from Mobo to vCard after boot. Now you can just set vCard as primary and see the whole boot process.

Thanks, will give that a try tomorrow, when the brain is less fuzzy. "Remove Intel Graphics", what do you mean?

 

[Gigamaxx]

Thanks, will give that a try tomorrow, when the brain is less fuzzy. "Remove Intel Graphics", what do you mean?

In clover boot menu, but once you set PEG as primary in bios it should not show up as an option in clover boot menu screen.

1). Connect monitor to motherboard.

2). Hold delete key to enter bios.

3). Set PEG as primary display output in “peripherals” section.

4). Save changed and reboot. The Motherboard connection should be black screen so connect to vCard to see boot options.

 

[elfcake]

In clover boot menu, but once you set PEG as primary in bios it should not show up as an option in clover boot menu screen.

1). Connect monitor to motherboard.

2). Hold delete key to enter bios.

3). Set PEG as primary display output in “peripherals” section.

4). Save changed and reboot. The Motherboard connection should be black screen so connect to vCard to see boot options.

Will let you know tomorrow. Thank you.

 

[pastrychef]

You see, that's the problem... I cannot access BIOS, CBM and I do not see the Apple load screen. It is all black screen until the Log In screen.

I have been looking through the forum but have yet to come across this problem.

If it's black all the way until you get to the login screen, I don't think it has anything to do with the hackintosh settings. It's probably either (1) a BIOS setting or (2) a hardware issue.

 

[elfcake]

If it's black all the way until you get to the login screen, I don't think it has anything to do with the hackintosh settings. It's probably either (1) a BIOS setting or (2) a hardware issue.

What should I look for in BIOS?

I tried plugging the DP cable into the Motherboard port, as @Gigamaxx suggested but I got a black screen so that avenue of experimentation does not work.