[Guide] 10.11+ USB changes and solutions

[RehabMan]

Hi

There is an issue with the intel usb dropping out and sometimes crashing with the setup.

Your USB port setup is not correct.

See guide:
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

 

[chumdoggin]

Your USB port setup is not correct.

See guide:
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

Thanks again for everything.

Looks ok to me except the port types are wrong. Would that possibly be the issue? There was an instance of a system
reboot upon removing the mouse adapter and replacing with a usb3 thumb drive on the usb3 port (hs01) for usb2 devices.

Or am I missing something else in the reading?

 

[chumdoggin]

testing with the port types set at 3 for usb3 hs01/ss01 and Zero for the rest. Its still off in operating correctly.

taking out the mouse and putting in the usb3 with ss01/hs01 port, the usb give the ejected improperly error
after a few seconds.

I did note, this 8086a12f XHC did not have the same number of ssXX ports as your NUC

Why not just take the UIAC ssdt out of patched directory instead of using the boot flag?

Edit: got the same number of ports as your skylake NUC this time, but also got a crash and reboot w/
the mouse adapter going from hs09 to hs10 with all the ports injecting.

Double checking everything. The ports types were correct (no change) no internals being used.

The only next best hunch... drivers for rt2870 I saw somewhere you saying to watch out in using them.
They don't react on the asmedia device, but switching around w/ the thumb drive on intel things get
wierd.

 

[RehabMan]

except the port types are wrong.

Wrong is wrong.

 

[chumdoggin]

Wrong is wrong.

hmm.. I went back looked at the NUC (skylake) example which only the (255) type was changed.

So I didn't need any change there but what else could it be? any hint? the ssdt should be correct.

 

[RehabMan]

hmm.. I went back looked at the NUC (skylake) example which only the (255) type was changed.

So I didn't need any change there but what else could it be? any hint? the ssdt should be correct.

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[chumdoggin]

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.

The problem is likely in using the rt3070 in testing.

 

[RehabMan]

The problem is likely in using the rt3070 in testing.

If you mean USB WiFi, realize it is not recommended, as per FAQ:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

 

[chumdoggin]

If you mean USB WiFi, realize it is not recommended, as per FAQ:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Yeah. Waiting on my adapter for 94360 card. Seems to do alright staying on the asmeda. But really think now it messed up
all the testing on the intel.

 

[chumdoggin]

The reason I think it does alright there is the intel uses XHC and the old driver gets screwy there.

I see the asmedia has XHCI over there under PSXS@0