Last login: Sat Jun 16 00:52:21 on console
brandens-iMac:~ branden$ sudo kextload /Users/branden/Desktop/AppleIntelInfo.kext
Password:
brandens-iMac:~ branden$ sudo cat /tmp/AppleIntelInfo.dat
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.
enableHWP................................: 0
Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x63eccde366 (12 MHz)
MWAIT C-States...........................: 1319200
Processor Brandstring....................: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz
Processor Signature..................... : 0x506E3
------------------------------------------
- Family............................... : 6
- Stepping............................. : 3
- Model................................ : 0x5E (94)
Model Specific Registers (MSRs)
------------------------------------------
MSR_IA32_PLATFORM_ID.............(0x17) : 0x4000000000000
------------------------------------------
- Processor Flags...................... : 1
MSR_CORE_THREAD_COUNT............(0x35) : 0x40004
------------------------------------------
- Core Count........................... : 4
- Thread Count......................... : 4
MSR_PLATFORM_INFO................(0xCE) : 0x80838F1012300
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x23 (3500 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 0 (LMP not supported)
- Number of ConfigTDP Levels........... : 0 (only base TDP level available)
- Maximum Efficiency Ratio............. : 8
- Minimum Operating Ratio.............. : 8
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x0
------------------------------------------
- I/O MWAIT Redirection Enable......... : 0 (not enabled)
- CFG Lock............................. : 0 (MSR not locked)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)
MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x0
- C-state Range........................ : 0 (C-States not included, I/O MWAIT redirection not enabled)
IA32_MPERF.......................(0xE7) : 0x30BC89BE1C
IA32_APERF.......................(0xE8) : 0x30717D4FE7
MSR_FLEX_RATIO...................(0x194) : 0xE0000
MSR_IA32_PERF_STATUS.............(0x198) : 0x267C00002700
------------------------------------------
- Current Performance State Value...... : 0x2700 (3900 MHz)
MSR_IA32_PERF_CONTROL............(0x199) : 0x2700
------------------------------------------
- Target performance State Value....... : 0x2700 (3900 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)
IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_INTERRUPT.............(0x19B) : 0x0
IA32_THERM_STATUS................(0x19C) : 0x88420000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 66
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)
MSR_THERM2_CTL...................(0x19D) : 0x0
IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)
MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x64140D
------------------------------------------
- Turbo Attenuation Units.............. : 13 (122.1 micro-Seconds)
- Temperature Target................... : 100
- TCC Activation Offset................ : 0
MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1
------------------------------------------
- EIST Hardware Coordination........... : 1 (hardware coordination disabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
- SpeedShift Technology Enable......... : 1 (enabled)
- SpeedShift Interrupt Coordination.... : 1 (enabled)
- SpeedShift Energy Efficient Perf..... : 1 (enabled)
- SpeedShift Technology Setup for HWP.. : Yes (setup for HWP)
MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x27272727
------------------------------------------
- Maximum Ratio Limit for C01.......... : 27 (3900 MHz)
- Maximum Ratio Limit for C02.......... : 27 (3900 MHz)
- Maximum Ratio Limit for C03.......... : 27 (3900 MHz)
- Maximum Ratio Limit for C04.......... : 27 (3900 MHz)
IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
- Power Policy Preference...............: 1 (highest performance)
MSR_POWER_CTL....................(0x1FC) : 0x3C005F
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)
MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)
MSR_PKG_POWER_LIMIT..............(0x610) : 0x42FFFF001BFFFF
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 13 (20480 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 0 (disabled)
- Time Window for Power Limit #2....... : 33 (10 milli-Seconds)
- Lock................................. : 0 (MSR not locked)
MSR_PKG_ENERGY_STATUS............(0x611) : 0x2DF6A64
------------------------------------------
- Total Energy Consumed................ : 2941 Joules (Watt = Joules / seconds)
MSR_PP0_POWER_LIMIT..............(0x638) : 0x0
MSR_PP0_ENERGY_STATUS............(0x639) : 0x1B5269D
------------------------------------------
- Total Energy Consumed................ : 1748 Joules (Watt = Joules / seconds)
MSR_PP0_POWER_LIMIT..............(0x638) : 0x0
MSR_PP0_ENERGY_STATUS............(0x639) : 0x1B5277E
------------------------------------------
- Total Energy Consumed................ : 1748 Joules (Watt = Joules / seconds)
MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x23
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x0
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKGC7_IRTL...................(0x60c) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0
MSR_PKG_C8_RESIDENCY.............(0x630) : 0x0
MSR_PKG_C9_RESIDENCY.............(0x631) : 0x0
MSR_PKG_C10_RESIDENCY............(0x632) : 0x0
MSR_PKG_C8_LATENCY...............(0x633) : 0x0
MSR_PKG_C9_LATENCY...............(0x634) : 0x0
MSR_PKG_C10_LATENCY..............(0x635) : 0x0
MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS)
MSR_PPERF........................(0x64E) : 0x2E37AF87BD
------------------------------------------
- Hardware workload scalability........ : 198502746045
MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x0
HDC Supported
IA32_PKG_HDC_CTL.................(0xDB0) : 0x0
IA32_PM_CTL1.....................(0xDB1) : 0x1
------------------------------------------
HDC Allow Block..................(0xDB1) : 1 (HDC blocked)
IA32_THREAD_STALL................(0xDB2) : 0x0
MSR_PKG_HDC_CONFIG...............(0x652) : 0x2
------------------------------------------
Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper)
MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0
MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0
MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0
IA32_TSC_DEADLINE................(0x6E0) : 0x63F7F794AF
IA32_PM_ENABLE...................(0x770) : 0x0 (HWP Supported but not, yet, enabled)
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 8 ( 800 MHz)
Maximum non-Turbo Ratio/Frequency........: 35 (3500 MHz)
Maximum Turbo Ratio/Frequency............: 39 (3900 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (8) 35 39 ]
CPU C6-Cores [ 0 2 3 ]
CPU P-States [ (8) 31 35 39 ]
CPU C6-Cores [ 0 1 2 3 ]
CPU P-States [ (8) 31 32 35 39 ]
CPU P-States [ 8 31 32 35 38 (39) ]
CPU P-States [ (8) 29 31 32 35 38 39 ]
CPU P-States [ (8) 29 30 31 32 35 38 39 ]
CPU P-States [ (8) 25 29 30 31 32 35 38 39 ]
CPU P-States [ (8) 25 26 29 30 31 32 35 38 39 ]
CPU P-States [ (8) 25 26 27 29 30 31 32 35 38 39 ]
CPU P-States [ (8) 25 26 27 28 29 30 31 32 35 38 39 ]
CPU P-States [ (8) 25 26 27 28 29 30 31 32 33 35 38 39 ]
CPU P-States [ 8 24 25 26 27 28 29 30 31 32 33 (35) 38 39 ]
CPU P-States [ 8 22 24 25 26 27 28 29 30 31 32 33 (35) 38 39 ]
CPU P-States [ (8) 22 24 25 26 27 28 29 30 31 32 33 35 36 38 39 ]
CPU P-States [ (8) 22 24 25 26 27 28 29 30 31 32 33 34 35 36 38 39 ]
CPU P-States [ (8) 19 22 24 25 26 27 28 29 30 31 32 33 34 35 36 38 39 ]
CPU P-States [ (8) 19 20 22 24 25 26 27 28 29 30 31 32 33 34 35 36 38 39 ]
CPU P-States [ 8 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 38 (39) ]
CPU P-States [ (8) 16 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 38 39 ]
CPU P-States [ 8 16 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 (39) ]
CPU P-States [ (8) 15 16 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 ]
brandens-iMac:~ branden$