Radeon Compatibility Guide - ATI/AMD Graphics Cards

[phrozenpenguin]

All those settings are good for your i7-3770.
In addition, you need to think about SMBIOS model ID. I use iMac13,2.
In addition, you need to decide if need IGPU (e.g. for FCPX/iMovie sharing as H.264) or not. If so make sure it's not Primary.

I use iMac13,2 and it has been solid, with working serials etc.
Yes I will want IGPU for FCPX etc. I'm not sure how I "make sure it's not primary" - the only control I have in the BIOS is on or off?

Do I still need these settings if I use e.g. whatevergreen and lulu?

rename GFX0 to IGPU
rename PEGP to GFX0
Inject Intel and enter 0x01620007 in the "ig-platform-id" section​

 

[pastrychef]

I use iMac13,2 and it has been solid, with working serials etc.
Yes I will want IGPU for FCPX etc. I'm not sure how I "make sure it's not primary" - the only control I have in the BIOS is on or off?

Do I still need these settings if I use e.g. whatevergreen and lulu?

rename GFX0 to IGPU
rename PEGP to GFX0
Inject Intel and enter 0x01620007 in the "ig-platform-id" section​

The renames are correct.

If you want to use IGPU, you will need to leave the ig-platform-id and Inject Intel settings.

 

[macnb]

I use iMac13,2 and it has been solid, with working serials etc.
Yes I will want IGPU for FCPX etc. I'm not sure how I "make sure it's not primary" - the only control I have in the BIOS is on or off?

Do I still need these settings if I use e.g. whatevergreen and lulu?

rename GFX0 to IGPU
rename PEGP to GFX0
Inject Intel and enter 0x01620007 in the "ig-platform-id" section​

Turn it ON and set ig-platform-id=0x01620007 in the config.plist->Graphics section and it should work otherwise ask HP.
Those settings are good for all the systems.

 

[Tom012]

Are the Fans of the recommended SAPPHIRE Nitro+ Radeon RX VEGA 64 working correctly?

 

[revevs]

Just added the Gigabyte RX 560 Gaming OC 4G to my system and it is working for me OoTB with no added kext.

I have DVI and HDMI (with HDMI > DVI adapter) connected.
I haven't tried DP.
I havent tried HDMI Audio.
Sleep works.
Monitors work from boot (no black screens at any point)
OpenCL benchmark of ~77000

System is set as 14,1

Kexts installed:
FakeSMC
IntelGraphicsFixup
Lilu
realtekALC

Clover:
InjectIntel and ig-platform-id set for my HD4600.

 

[phrozenpenguin]

Just added the Gigabyte RX 560 Gaming OC 4G to my system and it is working for me OoTB with no added kext.

I have DVI and HDMI (with HDMI > DVI adapter) connected.
I haven't tried DP.
I havent tried HDMI Audio.
Sleep works.
Monitors work from boot (no black screens at any point)
OpenCL benchmark of ~77000

System is set as 14,1

Kexts installed:
FakeSMC
IntelGraphicsFixup
Lilu
realtekALC

Clover:
InjectIntel and ig-platform-id set for my HD4600.

Do you also inject ATI?

 

[revevs]

Do you also inject ATI?

Nope. I literally just plugged the card in, assuming id need to add kext or change settings, but it just worked fine.

 

[fravin]

I'm so happy with the RX560.

The system looks so smooth. Never tried something like this, even on real macs.

FinalCut is working fine, youtube is ok, VLC works great... Nothing happens except for that smoooooth UI.

In love with it!

I don't have Intel IGX enabled and installed only FakeSMC. I'm using DP port.

My rig is:
Gigabyte B250m Gamming3
i5 7600k
8Gb Ram
Airport Hack (BT and Wifi from Apple)
Apple's Magic Keyboard and Trackpad 2
Fiio E17K (USB DAC Audio)

I've spent a little time trying to enable ALC audio, but since I use USB DAC just forget it.
I don't have audio via DP, but I don't care.

Just loving it!

 

[zcwaa22]

Hi,

First Hackintosh for about 6 years and everything is working fine except when I try and use a DisplayPort cable. I can get to the MacOS loading screen then everything goes black when it should show me the login screen. Using HDMI is the only way to see anything in MacOS, this is a problem as I have a 4k screen and only get 4k30p over HDMI.

Strangely I installed MacOS using the DisplayPort cable and could see the desktop, also if I boot from my Unibeast USB Drive into my MacOS partition I can use the DisplayPort Cable.

After installing MacOS I used the Multibeast settings from this build- https://www.tonymacx86.com/threads/...z370-aorus-ug-i7-8700k-ga-aorus-rx580.245362/

• Quick Start - UEFI Boot Mode
• Drivers
  • Audio - 100/200/300 Series Audio (do not select Drivers > Audio > Realtek ALC1220 at this time - it’s coming later)
  • Misc
    • FakeSMC Plugins (Opt)
    • FakeSMC HWMonitor Application (Opt)
  • Network - Intel - Choose latest IntelMausiEthernet
  • USB - Increase Max Port Limit 200 Series
• Bootloaders - Clover v2.4k r4063 UEFI Boot Mode + Emulated NVRAM
• Customize
  • Graphics Configuration - AMD Graphics Fixup (required for AMD card!)
  • System Definitions > iMac - iMac18,3

Attached are my config.plist and screenshot of EFI/EFI/Clover/kexts/other

Help would be much appreciated!

EDIT:- CSM is disabled in Bios and running 10.13.4

 

[ashman70]

Try getting rid of the AMD9xx kext, also try enabling your onboard GPU and adding IntelGraphicsFixup.kext