macOS 10.13.3 Supplemental Update

[Superbogey]

Yes. It matters. I don't know which one your motherboard uses...

I get PEG0 when looking through IOJones but no PEGP. So I go with PEG0 then?

 

[pastrychef]

I get PEG0 when looking through IOJones but no PEGP. So I go with PEG0 then?
View attachment 317170View attachment 317172

Yes.

 

[renatocg]

HI there. I'm still stuck. System reboot after this screen (and progress not completed). And it isnot doing the upgrade. macOS Install Data folder still there... one thing I don't see in Clover on reboot is the install driver that is supposed to appear. And my system is 14,2. I'm on the side of "it's fun to get the problem resolved". And I can only work if I can make this works.

 

[feisalm]

I updated, then went whole hog and used the CLOVER updates to remove the emulated NVRAM and installed the one that used the mainboard's NVRAM. I rebooted about 10,000 times and it would never use the Nvidia driver. Apparently the NVRAM was not being used?
In frustration, I turned off the machine and this morning, it boots with NVIDIA drivers. Apparently the mainboard needed a cold restart. Go figure.

I found out what the problem seemed to be. Apparently when I used the mainboard NVRAM, the default monitor switched from the DVI to the HDMI/DP ports. When that happened the accelerated Nvidia driver would never start. I discovered that by unplugging the HDMI/DP monitor, it would force the startup monitor to be the one on DVI and everything was fine. Even though the BIOS defaulted to the DVI port, it would never start there. The only workaround (apart from disconnecting the HDMI/DP on boot) was to switch to Windows OS in the BIOS and enable CSM. That caused the startup port to be DVI. Nvidia drivers work now.

 

[feisalm]

If OsxAptioFix3Drv-64.efi doesn't work for you, you can try AptioMemoryFix.efi. AptioMemoryFix.efi also restores native NVRAM.

Can I replace OsxAptioFix3Drv-64.efi with AptioMemoryFix.efi? or install both together?

 

[pastrychef]

Can I replace OsxAptioFix3Drv-64.efi with AptioMemoryFix.efi? or install both together?

Not both. One or the other.

 

[RehabMan]

Can I replace OsxAptioFix3Drv-64.efi with AptioMemoryFix.efi? or install both together?

My understanding: OsxAptioFix3Drv-64.efi is an old version of AptioMemoryFix.efi.

All "*Aptio*.efi" (and even OsxLowMemFix*.efi) are mutually exclusive.

 

[zedoc]

Can't put my computer to sleep after this update, screen going black but fans still running.
tried the usual Darkwake 0,8 or 10...No luck

EDIT: Solved
cupsd was preventing sleep, resetting printer config made sleep working again.

 

[adriankite]

HI there. I'm still stuck. System reboot after this screen (and progress not completed). And it isnot doing the upgrade. macOS Install Data folder still there... one thing I don't see in Clover on reboot is the install driver that is supposed to appear. And my system is 14,2. I'm on the side of "it's fun to get the problem resolved". And I can only work if I can make this works.

I have the same problem, any solutions?

 

[WandererRev]

Can't put my computer to sleep after this update, screen going black but fans still running.
tried the usual Darkwake 0,8 or 10...No luck

EDIT: Solved
cupsd was preventing sleep, resetting printer config made sleep working again.

how can I tell what is preventing sleep? I am trying to figure out my own sleep situation.