[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[Las_Vegas]

You should submit your changes for USB-C config for inclusion in the repo.

You already stated that you were including the change in the repo... I have since made additional adjustments to add support for the Dock Expansion port. Everything from the Dock is available through HS04/SS04. I've attached the revised SSDT-USB code including both the USB-C port and Dock.

Starting over with a fresh installation resolved the Bluetooth issue and everything seems to be working correctly.

LasVegas

 

[msusano]

I was successfully installed High Sierra in a prebook 440 G4.
The only issue is that after the screen goes off when goes to sleep the screen goes nuts.

Before:

After:

 

[Las_Vegas]

I was successfully installed High Sierra in a prebook 440 G4.
The only issue is that after the screen goes off when goes to sleep the screen goes nuts.

You might try increasing the IGPU graphics memory setting in BIOS. 64MB is recommended but I have mine set to 128MB because of the high resolution display on my Probook.

You might also check that you have to appropriate config.plist for your system. It may be identifying your display improperly.

LasVegas

 

[msusano]

This screen has 1366*768 max resolution. And I had install osx with 64MB and current is config with a 128MB and the result is the same.

I have used the config_4x0s_G4_Kabylake.plist file from RehabMan

 

[Las_Vegas]

This screen has 1366*768 max resolution. And I had install osx with 64MB and current is config with a 128MB and the result is the same.

I have used the config_4x0s_G4_Kabylake.plist file from RehabMan

It looks like your display is changing resolution after sleep. Check your System Preferences -> Display before and after sleep. Select "Scaled" to see what it's actually set to. See if you can set it back after sleep, changing the default to your preferred setting.

Also, open your config.plist and verify that GUI -> ScreenResolution is actually set to 1366x768. I found this setting effects the display during boot.

LasVegas

 

[RehabMan]

I think that boot failure happen just when video card driver is loading.

You are not using the recommended Clover build.
As per guide, you should be using the RehabMan Clover build.

 

[RehabMan]

Hello again,
now i use your Clover version. Forgot to mention that i used your version before but same issue. Very annoying. One more question, do i have to use the ACPIPoller.kext with my configuration or can i delete the kext?

thanks.

You should probably disable TRIM. Enabling TRIM has problems with certain SSD hardware. The guide files have TRIM disabled by default, but you changed it.

 

[RehabMan]

You already stated that you were including the change in the repo... I have since made additional adjustments to add support for the Dock Expansion port. Everything from the Dock is available through HS04/SS04. I've attached the revised SSDT-USB code including both the USB-C port and Dock.

Starting over with a fresh installation resolved the Bluetooth issue and everything seems to be working correctly.

LasVegas

Changes for HS04/SS04 (dock) added to github.

 

[RehabMan]

I was successfully installed High Sierra in a prebook 440 G4.
The only issue is that after the screen goes off when goes to sleep the screen goes nuts.

Before:
View attachment 305322


After:
View attachment 305323

Read here regarding patched EDID in display override:
https://www.tonymacx86.com/threads/readme-common-problems-in-10-13-high-sierra.233582/

 

[macleno]

You are not using the recommended Clover build.
As per guide, you should be using the RehabMan Clover build.

Boot failure also with the RehabMan Clover build but i got OS to boot by changing the smbios
with clover configurator from MacbookPro 9,2 to 11,1.