[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[Quipper]

Hello RehabMan,

if i start my Probook 450 G4 KabyLake my keyboard and trackpad is not working at login screen. I have to reboot multiple times or have to shutdown the laptop multiple times and start it again. This problem happens not in windows.

 

[Pescado]

When you update to the latest repo, you must update *all* components, not just a subset.

SSDT-IGPU.aml is wrong for your 1600x900 screen. You used the wrong param to install_acpi.sh.
Read the guide carefully.

Ok, I fixed it, thanks for the point about SSDT-IGPU.aml.

I updated all files from latest repo version, and I reinstall SSDT* using install_acpi.sh. The only thing was surprised me is to fix the problem I need to install install_8x60_hires instead install_8x60 with install_acpi.sh, if I understand properly has guide says the install_8x60 option should be the correct for 1600x900 resolution (non 1080p displays):

For example, my 4530s with 1366x768 display:
Code (Text):

./install_acpi.sh install_4x30s

Or my 4540s with 1080p display:
Code (Text):

./install_acpi.sh install_4x40s_hires

Thanks for helping.

 

[kocurr]

Still corrupt. Obviously you have a newer IORegistryExplorer on your system somewhere.

I tried to delete any ioreg in my system and again generate report.
Can you check this file?

 

[RehabMan]

Hello RehabMan,

if i start my Probook 450 G4 KabyLake my keyboard and trackpad is not working at login screen. I have to reboot multiple times or have to shutdown the laptop multiple times and start it again. This problem happens not in windows.

You are not using the recommended version of Clover.
Use the RehabMan build.

 

[RehabMan]

Ok, I fixed it, thanks for the point about SSDT-IGPU.aml.

I updated all files from latest repo version, and I reinstall SSDT* using install_acpi.sh. The only thing was surprised me is to fix the problem I need to install install_8x60_hires instead install_8x60 with install_acpi.sh, if I understand properly has guide says the install_8x60 option should be the correct for 1600x900 resolution (non 1080p displays):



Thanks for helping.

No.
1600x900 and 1920x1080 are both considered "hires" (both use dual link cable).

 

[RehabMan]

I tried to delete any ioreg in my system and again generate report.
Can you check this file?

Your config.plist is not up-to-date with respect to current github content.
I didn't check anything else.
You should insure you have the latest of everything as per post #1.

 

[macleno]

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Also, don't forget to fill out your profile with hardware details as requested in the FAQ.
Important data is currently missing from your profile.

I think that boot failure happen just when video card driver is loading.

 

[RehabMan]

I think that boot failure happen just when video card driver is loading.

Your profile lacks important hardware details.
In particular, screen resolution is missing.
Impossible to verify your configuration is correct without knowing screen resolution.

Please fix as per FAQ.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Hint: All hardware details (7 of them) should be present in the three profile fields (Mobo/CPU/Graphics). Remove the signature.

Also, you forgot to press F2 and F4 as per "Problem Reporting". Please try to read carefully.

 

[macleno]

Your profile lacks important hardware details.
Also, you forgot to press F2 and F4 as per "Problem Reporting". Please try to read carefully.

I hope that this one is right zip.

 

[Quipper]

You are not using the recommended version of Clover.
Use the RehabMan build.

Hello again,
now i use your Clover version. Forgot to mention that i used your version before but same issue. Very annoying. One more question, do i have to use the ACPIPoller.kext with my configuration or can i delete the kext?

thanks.