Contribute
Register

[SUCCESS] ASUS Z270 ROG Maximus IX Hero - i7-7700K - 32GB RAM - Intel HD 630

Status
Not open for further replies.
@JCMunsonII
Any chance you could share a list of all kext files in your /S/L/E, /L/E and in clover folder? I'd like to compare and learn. Maybe I'll figure out what might be missing. A list in text form would be better over screenshots.

Btw. is there any way to know what is causing errors with IOReg?

Edit:
Is there any good place in this forum where I can ask for help about all issues with my build at once?

Thank you.
 
VioletDragon said:
What is your RAM being seen as in macOS? Do you have XMP set to a Profile in the BIOS?
Click to expand...
Good questions.

I may have edited my RAM entry manually, so am not sure. As to the other, I have it set to 3200Mhz in BIOS (I don't know if that is a specific profile or not).
 
I was able to perform a benchmark for the graphics card (EVGA 1070 FTW2 ICX) today. GeekBench had an update, and perhaps my system profile change allowed it.

BenchmarksGraphics1.png

Of course, I don't have a license for the suite, so I could only test OpenCL (which Mac uses natively anyway).
 
Roboter said:
@JCMunsonII
Any chance you could share a list of all kext files in your /S/L/E, /L/E and in clover folder? I'd like to compare and learn. Maybe I'll figure out what might be missing. A list in text form would be better over screenshots.

Btw. is there any way to know what is causing errors with IOReg?

Edit:
Is there any good place in this forum where I can ask for help about all issues with my build at once?

Thank you.
Click to expand...
S/L/E is going to have a crapload of KEXTS. What is most useful, I think, would be a list of what I have in Clover's Other folder:

Screen Shot 2017-08-04 at 4.01.24 PM.png


You can ignore the "Unsure" folder - I used that to figure out some issues. These are also present in L/E (probably not necessary to have the duplication).
 
It's strange that I'm unable to get VoodooHDA working from L/E, but it works fine from the clover folder. Also I couldn't make Lilu and IntelGraphicsFixup working from L/E, but it worked fine from S/L/E though.

Is there any significant difference in using VoodooHDA over patched AppleHDA/realtekHDA? I'm failing to get latter working with this mobo.

Do we still need FakePCIID** kext in 10.12.6? I've seen a couple of people removing them, which I also did. My system does run just fine without them. It should be noted that I'm using BCM943602CS for WIFI and bluetooth, which works OOB.
 
Roboter said:
It's strange that I'm unable to get VoodooHDA working from L/E, but it works fine from the clover folder. Also I couldn't make Lilu and IntelGraphicsFixup working from L/E, but it worked fine from S/L/E though.
Click to expand...
That's a bit like my experience. ;) If it works...

Is there any significant difference in using VoodooHDA over patched AppleHDA/realtekHDA? I'm failing to get latter working with this mobo.
Click to expand...
I don't know that there is any difference. It is possible to get the AppleHDA working, I just didn't do it since the Voodoo is working just fine.

Do we still need FakePCIID** kext in 10.12.6? I've seen a couple of people removing them, which I also did. My system does run just fine without them. It should be noted that I'm using BCM943602CS for WIFI and bluetooth, which works OOB.
Click to expand...
Yes, you still need that kext.
 
I didn't meant FakeSMC.kext, which is meant for sensors.

FakePCIID family is used for different purposes, I just had a quick read here:
https://github.com/RehabMan/OS-X-Fake-PCI-ID

I assume one would always need to use two kext's (or I didn't get what the main FakePCIID is for), like FakePCIID and FakePCIID_xyz. Since I don't require any of the kext's with `_xyz`, I don't think my build needs that particular kext at all (I also don't have a discrete GPU.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top