Pentium G4560 halfway Success install

[shuhung]

Changed both of them and still the same problem.

I updated the Clover.rar in order to see it.

I truly don't know how to solve this because it doesnt even display a message

Make sure Clover version is higher than v4012, Asrock mobo (H110M-ITX/AC) work fine with OsxAptioFix2Drv-64.efi, you are missing NullCPUPowerManagement.kext, download it and put into /kext/other folder, it should work.

Upon now, there is no way to make HD610 work.

 

[BreBo]

Booting from the usb is ok and quick too. But from hdd no. I tried so many things.

One way and probably the easiest is to copy the EFI folder of your USB installer drive to the desktop, now mount the EFI partition of your hard drive, find and delete the EFI folder that is currently on the hard drive and replace it with the one you copied from the USB drive.

 

[Dan1994]

Disable Nvidia first and after installing the drivers turn iT back on, check your bios if it is correctly set up

 

[coolking1]

I'm also trying to install it, it hangs on: Mcache: 4CPU(s) for me.

Any ideas?

Pentium G4560 / GTX 1050 TI (nv_disable = 1) / NVMe drive (Applied patch)

 

[BreBo]

@coolking1, please update your profile (personal details) with your build (Motherboard or Make/Model, CPU and Graphics Card).

Profiles need to contain at least your primary system to assist others with helping you.

 

[coolking1]

@coolking1, please update your profile (personal details) with your build (Motherboard or Make/Model, CPU and Graphics Card).

Done!
Got it to boot now, but now I can only boot with cpus=1, otherwise it fails as the screenshot above.
Plist used is in the attachments.

Update: I injected LAPIC in kernel patches and everything is working now!

 

[typewriter]

Dif anyone try out the new driver with kabylake support to enable the IGP?

This guy here was quite sucessfull:

https://www.tonymacx86.com/threads/...ra-at-wwdc-available-fall-2017.223918/page-12

 

[valeslon]

hi all!
Recently I decided to experiment with a new Pentium processor g4560. So, I already had the Motherboard (Gigabyte H110M-memory standard DDR3), video card and 8GB of memory, SSD.
First, I'm glad to say that at least half of it works: 10.11.6 and clover did the trick. In theory I was thinking of masking the processor under Skylake series. ID FakeCPU 0x506E3 did not fit, the Installation ended with the panic. came code 0x306A0 (ivy bridge) .

Second, Built-in HD 610 also half works! I helped substitution ID IntelGFX 0x19128086 in clover, and fix the display. In this mode works without Hardware Acceleration. External video fully works with Nvidia Web drivers.

What I'd like to do is to run Hardware Acceleration on Video HD 610 and it's possible to patch the DSDT that would work with minimal fixes of clover. I Think it will be an interesting experiment for you and for me.

for a start I will put the files that I have now. Sorry for bad English.
MB dsdt h110m-s2h: http://dropfiles.ru/download/642b5c2577b9d2c7eec5fdd68433f8cb.html
Clover: http://dropfiles.ru/download/de1a5a7ecb0deac00b5fcac72df4612c.html

if you need other dumps, logs or something else, let me know.

DDR 3 -????????

 

[mufeng9]

Done!
Got it to boot now, but now I can only boot with cpus=1, otherwise it fails as the screenshot above.
Plist used is in the attachments.

Update: I injected LAPIC in kernel patches and everything is working now!

Does HD610 work?

 

[jhenu]

@denchik12 @Dan1994 @shuhung @kostaras14 @coolking1 @BreBo
I bought Intel G4560 as impulsive purchase. I want it to be converted to Hackintosh.
Can we make HD610 to work in mac OS sierra preferably 10.12.5
Can we make FCPX work with it with FULL HW acceleration (like Intel HD530) ?
Guide me How to do it. I got the time to test it.