Pentium G4560 halfway Success install

[denchik12]

hi all!
Recently I decided to experiment with a new Pentium processor g4560. So, I already had the Motherboard (Gigabyte H110M-memory standard DDR3), video card and 8GB of memory, SSD.
First, I'm glad to say that at least half of it works: 10.11.6 and clover did the trick. In theory I was thinking of masking the processor under Skylake series. ID FakeCPU 0x506E3 did not fit, the Installation ended with the panic. came code 0x306A0 (ivy bridge) .

Second, Built-in HD 610 also half works! I helped substitution ID IntelGFX 0x19128086 in clover, and fix the display. In this mode works without Hardware Acceleration. External video fully works with Nvidia Web drivers.

What I'd like to do is to run Hardware Acceleration on Video HD 610 and it's possible to patch the DSDT that would work with minimal fixes of clover. I Think it will be an interesting experiment for you and for me.

for a start I will put the files that I have now. Sorry for bad English.
MB dsdt h110m-s2h: http://dropfiles.ru/download/642b5c2577b9d2c7eec5fdd68433f8cb.html
Clover: http://dropfiles.ru/download/de1a5a7ecb0deac00b5fcac72df4612c.html

if you need other dumps, logs or something else, let me know.

 

[shuhung]

hi all!
Recently I decided to experiment with a new Pentium processor g4560. So, I already had the Motherboard (Gigabyte H110M-memory standard DDR3), video card and 8GB of memory, SSD.
First, I'm glad to say that at least half of it works: 10.11.6 and clover did the trick. In theory I was thinking of masking the processor under Skylake series. ID FakeCPU 0x506E3 did not fit, the Installation ended with the panic. came code 0x306A0 (ivy bridge) .

Second, Built-in HD 610 also half works! I helped substitution ID IntelGFX 0x19128086 in clover, and fix the display. In this mode works without Hardware Acceleration. External video fully works with Nvidia Web drivers.

What I'd like to do is to run Hardware Acceleration on Video HD 610 and it's possible to patch the DSDT that would work with minimal fixes of clover. I Think it will be an interesting experiment for you and for me.

for a start I will put the files that I have now. Sorry for bad English.
MB dsdt h110m-s2h: http://dropfiles.ru/download/642b5c2577b9d2c7eec5fdd68433f8cb.html
Clover: http://dropfiles.ru/download/de1a5a7ecb0deac00b5fcac72df4612c.html

if you need other dumps, logs or something else, let me know.

Pentium G4560 is work for both El Capitan and Sierra. IGPU will half work (garbled and useless) on El Capitan, and not work under Sierra (Window server PID error, can not reach GUI).

Mobo GA-H110M-H
CPU Pentium G4560
GPU NV GT630 (GK208) 2G DDR3
Ram 2x 8G ADATA DDR4-2133

 

[Dan1994]

I have G4560 with B250M-HDV mobo and a GTX1050ti graphics card. I have made an EFI usb drive and than with clover I have injected all files. After all I have copied the files you have uploaded but in verbose mode it shows me kernel panic and stops. (error 13) What am I doing wrong?

EDIT

tried with El Capitan, getting stuck at this screen attached

Cheers!

 

[P1LGRIM]

I have G4560 with B250M-HDV mobo and a GTX1050ti graphics card. I have made an EFI usb drive and than with clover I have injected all files. After all I have copied the files you have uploaded but in verbose mode it shows me kernel panic and stops. (error 13) What am I doing wrong?

EDIT

tried with El Capitan, getting stuck at this screen attached

Cheers!

There is no support at all for the GTX 10*0 graphics series.

 

[shuhung]

I have G4560 with B250M-HDV mobo and a GTX1050ti graphics card. I have made an EFI usb drive and than with clover I have injected all files. After all I have copied the files you have uploaded but in verbose mode it shows me kernel panic and stops. (error 13) What am I doing wrong?

EDIT

tried with El Capitan, getting stuck at this screen attached

Cheers!

Use Clover r4012 or higher, for G4560 use FakeCPUID 0x0306a0.

Attached are my config.plist & PM ssdt files

 

[denchik12]

Pentium G4560 is work for both El Capitan and Sierra. IGPU will half work (garbled and useless) on El Capitan, and not work under Sierra (Window server PID error, can not reach GUI).

Mobo GA-H110M-H
CPU Pentium G4560
GPU NV GT630 (GK208) 2G DDR3
Ram 2x 8G ADATA DDR4-2133

is there some hope to work in HD 610/620/630 in 10.12 ? As far as I can understand, the difference between the HD 5xx - 6xx HD is not large . El Capitain driver works without 3d acceleration. On the mr Forum. Rehamban wrote about the successful launch of HD 620 (10.11) with QE/CI . intuitively I suspect that HD 610 also can work. Perhaps someone from the Guru's the hackintosh will help us?

 

[shuhung]

is there some hope to work in HD 610/620/630 in 10.12 ? As far as I can understand, the difference between the HD 5xx - 6xx HD is not large . El Capitain driver works without 3d acceleration. On the mr Forum. Rehamban wrote about the successful launch of HD 620 (10.11) with QE/CI . intuitively I suspect that HD 610 also can work. Perhaps someone from the Guru's the hackintosh will help us?[/QUOTE

Core i3 base HD630 or higher should be ok, for me i3-7100 base built with full QE/CI (tested 10.11.6 to 10.12.4 beta), but have issues like display resolution not support 2560x1080 (my LG 21:9), enable HDMI sound will cause system reboot.

I think Pentium base HD630 like G4600 will not work on Sierra (should cause windows server PID error), it should work with El Capitan 10.11.6.

Pentium G4560 with HD610 will not work (windows server PID error under Sierra 10.12.x), partially work on El Capitan with garbled display, useless.

 

[kostaras14]

hi all!
Recently I decided to experiment with a new Pentium processor g4560. So, I already had the Motherboard (Gigabyte H110M-memory standard DDR3), video card and 8GB of memory, SSD.
First, I'm glad to say that at least half of it works: 10.11.6 and clover did the trick. In theory I was thinking of masking the processor under Skylake series. ID FakeCPU 0x506E3 did not fit, the Installation ended with the panic. came code 0x306A0 (ivy bridge) .

Second, Built-in HD 610 also half works! I helped substitution ID IntelGFX 0x19128086 in clover, and fix the display. In this mode works without Hardware Acceleration. External video fully works with Nvidia Web drivers.

What I'd like to do is to run Hardware Acceleration on Video HD 610 and it's possible to patch the DSDT that would work with minimal fixes of clover. I Think it will be an interesting experiment for you and for me.

for a start I will put the files that I have now. Sorry for bad English.
MB dsdt h110m-s2h: http://dropfiles.ru/download/642b5c2577b9d2c7eec5fdd68433f8cb.html
Clover: http://dropfiles.ru/download/de1a5a7ecb0deac00b5fcac72df4612c.html

if you need other dumps, logs or something else, let me know.

Hey I have g4560 without a GPU and an ASROCK h110m-hdv motherboard. I Modified the config.plist and I got over kernel panic but now the screen freezes like the picture below.

I also uploaded my clover folder.

Any suggestion?

 

[BreBo]

Hey I have g4560 without a GPU and an ASROCK h110m-hdv motherboard. I Modified the config.plist and I got over kernel panic but now the screen freezes like the picture below.

Make sure that CsrActiveConfig is set to 0x67 not 0x03 in Clovers config.plist.
If that doesn't work, try using OsxAptioFixDrv-64.efi instead of OsxAptioFix2Drv-64.efi.

 

[kostaras14]

Make sure that CsrActiveConfig is set to 0x67 not 0x03 in Clovers config.plist.
If that doesn't work, try using OsxAptioFixDrv-64.efi instead of OsxAptioFix2Drv-64.efi.

Changed both of them and still the same problem.

I updated the Clover.rar in order to see it.

I truly don't know how to solve this because it doesnt even display a message