I think you will be fine with just using cpufakeid at clover boot. You can enter it in manually at Clover boot. Go to Options > Binaries Patch > and type in the Fake CPUID number there. Since it does not permanently save this patch you will have to do this after every reboot until you are able to get in to clover configurator post install and save it in to the file. Thanks for reminding me of this procedure. I forgot to mention it in my original post.
I am also remembering that I used an old USB 2.0 header that I had around to do all of the install. I maybe should edit the original post and emphasize this fact because this motherboard does not have USB 2.0 ports on its own. If you dont have a USB 2.0 header around you may have to have USB drivers loaded pre-install.
To help you out because of your situation I will attach a copy of my EFI folder. I modified it to turn nvidia inject off so that you wouldnt have any issues with Intel HD630. I also generated your own set of serial numbers so that it is unique to your own system. This should get you connected to the imessage and such right out of the box. This should have everything preloaded for things like USB, and already has most of the changes found in the guide. Intel HD630 might even work out of the box for you if the bios is set up correctly. I would recommend trying doing everything yourself first if you can because it will be beneficial for you to know the procedure and how it all works for any troubleshooting. But this will help kickstart you if things just arnt cooperating with your situation.
