[SOLVED] macOS Sierra Installation stuck

[cmn699]

Please post the contents of your kexts folder in your newly created USB Installer. The System will be using them to continue booting. That kext folder from your USB installer would have been copied to the SATA HDD you have now renamed MacOS Sierra. I am particularly interested to know if it contains Rehabman''s USBInjectAll.kext that injects the kexts to all USB ports with Intel EHCI/XHCI chipset automatically. I have found this a life-saver for my installation warding off KPs from USBHostFamily.kext that kills the system.

 

[R3vox]

I just active the EHCI option. I really though it was enabled but it wasn't.
I also unplugged the 2.0 USB devices that was plugged, and Sierra turned on.

Now I just have another question, which Realtek ALC should I install for the audio?

 

[cmn699]

Now I just have another question, which Realtek ALC should I install for the audio

I cannot say that off hand for your MoBo. My H61M-HD2 uses Realtek ALC 888b. If I can find it through my search on your MoB SPEC, I'll try to post it soon.

 

[cmn699]

This is the info about your audio:

• Audio
  1. Realtek ALC887 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
     * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
  4. Support for S/PDIF Out

 

[BreBo]

Now I just have another question, which Realtek ALC should I install for the audio?

Gigabyte GA-P61A-D3 uses Realtek ALC887 codec

 

[cmn699]

Thank you BreBo. Mutibeast 9.01 puts ALC 887 and 888b together . Therefore no difference
For some reason I had to use Toleda's audio_clover_120_v1.0b0.command to get my audio working in my H61-M-HD2 system when Multibeast 9.01 choice did not fix it initially as I expected it to do.

 

[R3vox]

Thank you BreBo. Mutibeast 9.01 puts ALC 887 and 888b together . Therefore no difference
For some reason I had to use Toleda's audio_clover_120_v1.0b0.command to get my audio working in my H61-M-HD2 system when Multibeast 9.01 choice did not fix it initially as I expected it to do.

I tried installing ALC 888b from Multibeast and it didn't work.
I also tried audio_clover_120_v1.0b0.commant and it didn't work too.
Any suggestions?

 

[cmn699]

So, you have completed the Installation of Sierra on the SATA HDD, installed Clover EFI Bootloader on it , gave it a System definition and rebooted without the need for a "companion USB Installer"?
The only Problem is the Audio?

Have you enabled Audio on the BIOS?
Can you capture the screen of Apple>About This Mac>System report...> Hardware>Audio and upload the image like mine?
Can you capture the screens of Toleda's audi0_clover_120 on Terminal as you run them and upload them here for us?

 

[R3vox]

One screen is about Hardware > Audio > Intel High Definition Audio
The other one screen is about Hardware > Audio > Devices

 

[cmn699]

What is shown at :

• System Preferences> Sound > Output
• System Preferences> Sound >Input

Upload image like the attached: