- Joined
- Dec 26, 2016
- Messages
- 37
- Motherboard
- raspberry pi 3
- CPU
- BCM2837
- Graphics
- BCM2837
- Classic Mac
I captured the commands sent over the i2c connection from the logic board to the ivad board, reproduced them with code and played them back using an arduino.
I just put the code up on github for those interested in doing this.
https://github.com/qbancoffee/emac_ivad_board_init
I bet the same could be done by hacking the i2c bus on a standard VGA connection without having to use an external micro controller like I did.
I just put the code up on github for those interested in doing this.
https://github.com/qbancoffee/emac_ivad_board_init
I bet the same could be done by hacking the i2c bus on a standard VGA connection without having to use an external micro controller like I did.