Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

Status
Not open for further replies.
vincedenice said:
I did.

There is my files
Click to expand...

Clover v3566 is not very recent.
Make sure you disabled hibernation.

Why do you have 10.11.5 installed? Current version is 10.11.6. From where did you download it? On what hardware did you create your USB installer?

Disable serial port from BIOS, if possible.

GenericUSBXHCI.kext is not recommended. Has no application to your hardware... Should not be present in EFI/Clover/kexts/Other. Unrelated to current problem though...

What is the NB-290 device connected at port 2 of the hub at XHC.HS03? Looks like a bluetooth controller. Is it external? Use internal bluetooth instead. Note comment in SSDT-USB-8x0-G1.dsl regarding unknown internal bluetooth device location... assuming you have internal bluetooth, read post #1, "USB Customization".
 
Hello, first of all sorry for my english, i'm french.

I've ordered an hackbook elite (basic one - elitebook8460p) but I'm a beginner and I clearly don't know what's inside and the hackbook elite website don't give anymore support.
Is there a way to know what config.plist should i use for the first boot ?

Thanks :)
 
Request for usb aml, config.plist and anything usefull that you can make for this laptop:

HP Pavilion 15 n096ea
i5 4200u/hd 4400
mobo: Hewlett-Packard 2163
Chipset: Intel Lynx Point-LP

battery and backlight work after patching, still cant figure out how to properly patch audio (alc3227)
sometimes when i start the system ethernet does not work also my mouse some time does not start with the system i have to re-plug it
 

Attachments

  • Archive.zip
    44.2 KB · Views: 76
oscarr said:
Request for usb aml, config.plist and anything usefull that you can make for this laptop:

HP Pavilion 15 n096ea
i5 4200u/hd 4400
mobo: Hewlett-Packard 2163
Chipset: Intel Lynx Point-LP

battery and backlight work after patching, still cant figure out how to properly patch audio (alc3227)
sometimes when i start the system ethernet does not work also my mouse some time does not start with the system i have to re-plug it
Click to expand...

Off-topic. This guide is only for those laptops listed in post #1.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
 
RehabMan said:
Clover v3566 is not very recent.
Make sure you disabled hibernation.

Why do you have 10.11.5 installed? Current version is 10.11.6. From where did you download it? On what hardware did you create your USB installer?

Disable serial port from BIOS, if possible.

GenericUSBXHCI.kext is not recommended. Has no application to your hardware... Should not be present in EFI/Clover/kexts/Other. Unrelated to current problem though...

What is the NB-290 device connected at port 2 of the hub at XHC.HS03? Looks like a bluetooth controller. Is it external? Use internal bluetooth instead. Note comment in SSDT-USB-8x0-G1.dsl regarding unknown internal bluetooth device location... assuming you have internal bluetooth, read post #1, "USB Customization".
Click to expand...

I have follow every steps to create a new hackintosh. I mix the 2 tutorials. I'm now on 10.11.6. Created with a USB2.

I Removed GenericUSBXHCI.kext.

The NB-290 device connected at port 2 of the hub at XHC.HS03 is my bluetooth mouse controller.

Where can i disable hibernation ?

I still have the problem of wake :(
 
Last edited:
vincedenice said:
I have follow every steps to create a new hackintosh. I mix the 2 tutorials. I'm now on 10.11.6. Created with a USB2.

I Removed GenericUSBXHCI.kext.

The NB-290 device connected at port 2 of the hub at XHC.HS03 is my bluetooth mouse controller.

Where can i disable hibernation ?

I still have the problem of wake :(
Click to expand...

Don't mix guides.
Read post #1.
 
I mean I used this guide :
RehabMan said:
This guide for creating USB and installing using Clover UEFI works well for this laptop: http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html
Click to expand...

and this :

RehabMan said:
Special notes:

- Definitely copy RealtekRTL8111.kext and IntelMausiEthernet.kext to Clover/kexts/Other as having network support during post-install is required (the rest of this guide depends on it). An alternative is to copy FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, and ProBookAtheros.kext to Clover/kexts/Other. This will enable WiFi, provided you have compatible WiFi hardware already installed.

Note: FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext are available here: https://github.com/RehabMan/OS-X-Fake-PCI-ID. ProBookAtheros.kext is available in the 4x30s DSDT patch github: https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch (download the ZIP of the entire github project).

- GenericUSBXHCI.kext is not necessary with this laptop since AppleUSBXCHI.kext appears to work well natively.

- Also copy HPFanReset.efi to EFI/Clover/drivers64UEFI. HPFanReset.efi is available here: https://bitbucket.org/RehabMan/hp-probook-4x30s-fan-reset/downloads

- Use the 'createinstallmedia' approach. It works well, and there is little chance for pilot error. This method also gives you an OS X recovery partition.

- It is best to use a USB2 stick. USB3 on 6-series ProBook/EliteBook will have issues.

- Some laptops will need to use the alternate DropTables as mentioned in the guide. Likely required for Sandy Bridge models with turbo boost enabled CPUs (eg. Core i5-2xxx, Core i7-2xxx, but not Core i3-2xxx).
Click to expand...
 
Hello!!

Thanks for this really great guide and hotpatch !! Can you give me the download link for a config.plist for a HP 2560p ??
Can´t find it anywhere? Thanks a lot for helping!! greets Christoph
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top