- Joined
- Mar 23, 2013
- Messages
- 9
- Motherboard
- GA-Z68X-UD3H-B3
- CPU
- i7 2600K
- Graphics
- Nvidia GTX 750 TI
- Mac
Hey hackers,
I am trying to get the following to work :
MB : H97N-Wifi
CPU : i3 4170
Gfx: onboard Intel HD, plugged via HDMI or DVI
Boot : Clover
PSU: corsair VS350
Case : who cares ?
WiFi : the recommended PCI card from the buying guide
HDD = 1TB from seagate
I successfully installed El Capitan, with no issues. After the installation, I applied a few options in Multibeast :
Sound card (892), Atheros and Intel network driver, iMac 14,2, … (took Storck's config).
Now, when booting, I'm always stuck right after :
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPoerManagement) timed out
WARNING: IOPlatformPlutingUtil : getCPUIDInfo : this is an unknown CPU model 0x3C
-- power management may be incomplete or unsupported
And then it cycles through:
Profile[0]: mode :0; desense:0; desense_level:0; chain_power_offset:0,0,0,0,
Profile[1]: mode :0; desense:0; desense_level:0; chain_power_offset:-7,0,-7,0,
Profile[2]: mode :0; desense:0; desense_level:0; chain_power_offset:-7,0,-7,0,
Apple80211Requets[10154] Unsupported ioctl 221
IOCTL not recognized: 221 out of 236
(I suspect this to be due to the unsupported onboard WiFi, and has nothing to do with my problem ?)
I've plugged the screen to the other MB HDMI port, no luck. I also tried switching to DVI instead of HDMI. I have tried safe mode, booting with nv_disable=1, using another FakeCPUID (used the Haswell code, 0x0306C0,… ).
Still no luck.
I double-checked the BIOS settings, and it seems to be as expected XMP profile1, no VT-D (it isn't a 'K' processor, so … ), …
Anything that could help ? Any specific log on the box that can give more details about what the problem is ?
Cheers,
Petzi
I am trying to get the following to work :
MB : H97N-Wifi
CPU : i3 4170
Gfx: onboard Intel HD, plugged via HDMI or DVI
Boot : Clover
PSU: corsair VS350
Case : who cares ?
WiFi : the recommended PCI card from the buying guide
HDD = 1TB from seagate
I successfully installed El Capitan, with no issues. After the installation, I applied a few options in Multibeast :
Sound card (892), Atheros and Intel network driver, iMac 14,2, … (took Storck's config).
Now, when booting, I'm always stuck right after :
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPoerManagement) timed out
WARNING: IOPlatformPlutingUtil : getCPUIDInfo : this is an unknown CPU model 0x3C
-- power management may be incomplete or unsupported
And then it cycles through:
Profile[0]: mode :0; desense:0; desense_level:0; chain_power_offset:0,0,0,0,
Profile[1]: mode :0; desense:0; desense_level:0; chain_power_offset:-7,0,-7,0,
Profile[2]: mode :0; desense:0; desense_level:0; chain_power_offset:-7,0,-7,0,
Apple80211Requets[10154] Unsupported ioctl 221
IOCTL not recognized: 221 out of 236
(I suspect this to be due to the unsupported onboard WiFi, and has nothing to do with my problem ?)
I've plugged the screen to the other MB HDMI port, no luck. I also tried switching to DVI instead of HDMI. I have tried safe mode, booting with nv_disable=1, using another FakeCPUID (used the Haswell code, 0x0306C0,… ).
Still no luck.
I double-checked the BIOS settings, and it seems to be as expected XMP profile1, no VT-D (it isn't a 'K' processor, so … ), …
Anything that could help ? Any specific log on the box that can give more details about what the problem is ?
Cheers,
Petzi