Ok, I will try to do a new install and document every step.
I apologize for my poor English language skills.
- I took out motherboard battery for 10 minutes,
- Downgraded bios to 0504, to flash motherboard, used BIOS FLBK button on my motherboard, and upgraded via GIU to 1702.
- Cleared cmos again by pressing CLR_CMOS button.
- Turned of EZ_XMP, EPU and TPU switches
- Created Unibeast USB 2 Installation Drives 16GB. (unibeast 6.2)(Mac OS X 10.11.4)(I put your config into EFI partition)
- Bios
- Run Q-Fan Control -> Optimize All,
- Set correct time and date,
- Set Ai Overclock Tuner to XMP to get proper RAM Speed
- Advanced > System Agent (SA) Configuration > VT-d Disabled(it was already Disabled)
- Advanced > (SA) Configuration > Graphics Configuration > Primary Display > PEG
- Advanced > (SA) Configuration > Graphics Configuration > IGPU Multi-Monitor > Disabled(it was already Disabled)
- Advanced > USB Configuration > XHCI Handoff > Enabled
- Boot > CSM (Compatibility Support Module) Launch CSM > Enabled (it was already Enabled)
- Boot > CSM > Boot Device Control > UEFI and Legacy OPROM (it was already set to UEFI and Legacy OPROM)
- Boot > CSM > Boot from PCI-E/PCI Expansion Devices > UEFI driver first(I don’t use PCI-E/PCI drives, but set it anyway)
- Secure Boot > OS Type > Other OS
- Secure Boot > Delete all keys under Key Management (4 in total) (Why do we have to delete these 4 keys?)
- F10
- Insert USB and boot into installer
- I usually reformat SSD to master boot record partition scheme and back to 4›at all)
- And install(only 7 minutes)
- Reboot, set country, skipped wifi, set user name and password, set time zones and here we go Desktop.
I use Microsoft radio keyboard and mouse to go through installation process, it does work properly wireless range is very short only 30-40 cm.
I download Multibeast and all other kexts before installation and put them on separate USB 3 drive.
- Used Clover Configurator to mount EFI partition and Multibeast 8.1.0 with your premade settings.
Open config.plist on the EFI partition with Clover Configurator and followed you guide and entered Comment : Change HDAS to HDEF: FIND : 48444153:REPLACE : 48444546. What do these numbers mean? Where do you get them?
In Clover Configurator in Acpi section, DSDT name it was written DSDT.aml, I deleted it as it was empty in your picture.(i didn't nice it before)
then in Boot section I removed the tick for dart=0 box and tick nvda_drv=1 box, Under the Custom Flags I add -uia_exclude_ss.
Saved and closed.
I Installed Nvidia driver and SSDT-i7-6700K.aml and installed USBInjectAll.kext (RehabMan-USBInjectAll-2016-0423.zip) with KextBeast, then AGDPfix and reboot.
After reboot I followed wifi/bt mini guide.
Reboot. Bluetooth/Wifi working.
Fixed App store with sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist and reboot.