[FIX] HD4200/HD4400/HD4600/HD5600 on 10.11+

[RehabMan]

here

The ioreg shows FakePCIID not loading. Check system.log.

If you didn't reboot after rebuilding cache, you should do that. Keep in mind that ioreg is something that changes as you change the configuration. Hopefully, you're not providing an ioreg file that you saved at a previous time (you must always capture a new one by running IORegistryExplorer v2.1, and choosing save as).

Note also that your SMBIOS is incorrect for your hardware. See guide for correct config.plist: http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html

Also note that CPU PM is not implemented: http://www.tonymacx86.com/el-capita...01-guide-native-power-management-laptops.html

Also note that eventually, you'll need to rename GFX0->IGPU to get IGPU PM: http://www.tonymacx86.com/el-capitan-laptop-support/152573-guide-patching-laptop-dsdt-ssdts.html

 

[henildoo]

I just got QE/CI somehow now. So do i have anything more to do?

 

[RehabMan]

I just got QE/CI somehow now. So do i have anything more to do?

The rebuild cache/reboot must have done it.

For other tasks, see my previous post.

 

[cgiannakidis70]

Hi to all.
I have a lenovo g50-80 laptop with core i3-4005U/HD4400.I followed your guide but now the laptop stops booting with the bar under the apple logo somewhere in the middle and does nothing after that.It's the only laptop i have and i'm writing from this one with a live linux usb.What can i do to resolve this problem?
Thanks in advance.

 

[RehabMan]

Hi to all.
I have a lenovo g50-80 laptop with core i3-4005U/HD4400.I followed your guide but now the laptop stops booting with the bar under the apple logo somewhere in the middle and does nothing after that.It's the only laptop i have and i'm writing from this one with a live linux usb.What can i do to resolve this problem?
Thanks in advance.

Boot verbose, show photo. Post EFI/Clover folder as ZIP (omit 'themes' folder).

 

[cgiannakidis70]

Hi again
I have attached two photos of boot, below.How to get EFI/Clover directory from EFI partition of disk in linux?
Thanks

 

[RehabMan]

Hi again
I have attached two photos of boot, below.How to get EFI/Clover directory from EFI partition of disk in linux?
Thanks

No need for Linux.

You can boot using your USB, mount EFI in OS X, copy to temp location, remove themes, and collect as ZIP.

Also, don't forget to fill out your profile...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

 

[cgiannakidis70]

This is my signature:
Mobo: Lenovo G50-80(Clover)
CPU: core i3-4005U/-
Graphics: HD4400/1366-768

I tried to boot from usb as you said but i did not to boot successfully.Same thing.

 

[RehabMan]

This is my signature:
Mobo: Lenovo G50-80(Clover)
CPU: core i3-4005U/-
Graphics: HD4400/1366-768

Single computer specs should be in your profile, but ok.

I tried to boot from usb as you said but i did not to boot successfully.Same thing.

Then you must have installed something to your system partition wrongly.

Try safe mode, without caches, etc.

 

[minolas]

Hi! I just did my first hackintosh. All went well, except Audio and Graphics. What bothers me are the Graphics. It says I only use 7 MB. I did the 2 kext installations from post #1 and I also changed my EFI/Clover/config.plist , but nothing seemed to work. What happens is that because of the config.plist for HD 4400 when i restart my system the boot options in Clover disappear and I can't boot and Clover menu turns into (sometimes gray, sometimes blue).
Thank you very much.