[Success] El Capitan Gigabyte Z97M-DS3H

[techyteddy]

Hi Everyone,

I just like to share my experience.

My Hardware:

Motherboard: GA-Z97M-DS3H
CPU: Intel 4690K
CPU Cooler: Corsair Hydro Series H75
RAM: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
Graphics: EVGA GeForce GTX 760 Super Clocked ACX 2GB
PSU: Corsair CX600
Case: Antec P50
SSD: Samsung EVO 250GB

My BIOS Settings:
1. VT-D = Disabled
Installation:

I followed the install guide in tonymacy86.com , but in summary:
1. Download OS X El Capitan
2. Create bootable USB using unibeast 6.1.1
3. Boot to USB
4. Install OS X El Capitan (In my case, I had to use a boot flag to get in to the installer nv_disable=0")
5. I used the latest version of Multibeast with this following settings:
Quick Start: UEFI Boot Mode, Driver: Audio (ALC887/888b) , Network (RealtekRTL811 v2.0.0), Customize (Graphics config: Didn't check anything, System Definition: iMac 14,2)
6. Installed Nvidia Web driver after installing, Reboot system bootflag will no longer necessary at this point.


Good luck!

-Techyteddy

 

[tmtcsonic]

how about the usb problem?

all is fine?

 

[N10ash]

Hi Everyone,

I just like to share my experience.

My Hardware:

Motherboard: GA-Z97M-DS3H
CPU: Intel 4690K
CPU Cooler: Corsair Hydro Series H75
RAM: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
Graphics: EVGA GeForce GTX 760 Super Clocked ACX 2GB
PSU: Corsair CX600
Case: Antec P50
SSD: Samsung EVO 250GB

My BIOS Settings:
1. VT-D = Disabled
Installation:

I followed the install guide in tonymacy86.com , but in summary:
1. Download OS X El Capitan
2. Create bootable USB using unibeast 6.1.1
3. Boot to USB
4. Install OS X El Capitan (In my case, I had to use a boot flag to get in to the installer nv_disable=0")
5. I used the latest version of Multibeast with this following settings:
Quick Start: UEFI Boot Mode, Driver: Audio (ALC887/888b) , Network (RealtekRTL811 v2.0.0), Customize (Graphics config: Didn't check anything, System Definition: iMac 14,2)
6. Installed Nvidia Web driver after installing, Reboot system bootflag will no longer necessary at this point.


Good luck!

-Techyteddy

Did you have to do any changes to XMP? I saw another post for Yosemite for this motherboard that said to do XMP 1. Also, do you have any idea how to get the built in HD 4600 graphics working?