Sebinouse's Build : CustoMacMini 2014 - Intel NUC Haswell i5-4250U - El Capitan

[nscxp2005]

Sorry the comment was the sebinouse.

It would be nice the see a video of the system running. Also how fast is boot times?

 

[innatech]

Boot takes me about 8 to 10 seconds from Clover to the login window. I have 2x4GB DDR3 1600 and a 128GB mSATA SSD.

 

[nscxp2005]

Awesome. I can't wait to get one of these.

 

[innatech]

Tried putting AppleIntelE1000.kext in /L/E ... no difference. Nothing in the BIOS seems relevant, I already had LAN power savings off and all WOL settings disabled.

Disabling the ACPI C2 Report didn't help.

Maybe I'll give IntelMausiEthernet a try?

 

[Sebinouse]

Boot takes me about 8 to 10 seconds from Clover to the login window. I have 2x4GB DDR3 1600 and a 128GB mSATA SSD.

Same time for me with 16 GB DDR3L (the L is important when you buy it)

This seems to happen no matter which setting is used in BIOS (auto, or either port as primary). It happens after Clover boots OS X, Clover works fine (and only appears on the monitor connected to the primary port). The corruption I get looks almost like bad EDID detection, but both logically and intuitively that doesn't seem likely when it works fine connecting the second monitor after login.

I'll see if I can find any difference in the startup logs with one vs. two displays connected.

I chose to use a "0x0a26000d" frame buffer for my NUC, maybe it's a mistake but it the one that gives me the best result for my configuration (one HDTV 1080p on HDMI with audio).

You can try a "0x0d220003" FB which is more universal (another HDMI audio Clover patch is needed but we will see that after). For that you have to :

• Set your BIOS IGP min mem to 32MB
• replace SSDT-.aml with the one attached

About EDID there might be an injection with Clover, but I have ti read documentation for that !

 

[Sebinouse]

Tried putting AppleIntelE1000.kext in /L/E ... no difference. Nothing in the BIOS seems relevant, I already had LAN power savings off and all WOL settings disabled.

Disabling the ACPI C2 Report didn't help.

Maybe I'll give IntelMausiEthernet a try?

IntelMausiEthernet.kext in EFI/.../10.11/ seems to work for me even after sleep... let me know for you !

 

[innatech]

The Mausi kext bundle produces a kernel panic during boot when substituted for the AppleIntelE1000e kext bundle in /S/L/E. At least, without changes to the Clover/EFI configuration.

I'll try injecting it via Clover.

 

[innatech]

No luck with the latest 2.0.2.d7 in the insanelymac thread, I'll try the 2.0 version from GitHub.

 

[Sebinouse]

No luck with the latest 2.0.2.d7 in the insanelymac thread, I'll try the 2.0 version from GitHub.

I tried this one in EFI/.../10.11/

 

[innatech]

Nope, getting the same configd kernel panic, backtrace shows com.apple.IONetworkingFamily, IOPCIFamily and com.insanelymac.IntelMausiEthernet

Do I need to change something in the Clover config? Seems like if its working for you it should be working for me.

I'll try the one you just uploaded and see if that works.