- Joined
- Feb 6, 2014
- Messages
- 27
- Mac
- Classic Mac
- Mobile Phone
Hi all,
I want to install a fresh version of 10.11 on my now 10.10 clover system. I created the USB like this:
- terminal command to copy installer to usb
- install clover for uefi only 64bit with EmuVariable, OsxAptioFixDrv and PartitionDxe
- replace vboxhfs with hfsplus
- place fakesmc and realtek kext in 10.11 kexts folder (also tried 'other' folder)
- in config plist, change csractiveconfig value to 0x3 (also tried with original value)
- in config plist, fill in fresh generated SN, SmUUID, MLB values
- tried booting with and without rootless=0
When booting from USB, clover shows. I select the installer, the apple logo shows and after 2 sec the screen flashes black and the PC reboots. When booting verbose (with or without cache), the crash happens at line 3, which looks like this:
++++++++++++++++++++++++++++++++++++++++++++++++
When using Vboxhfs instead of hfsplus, it takes a couple of seconds longer for the crash to occur, however in verbose it still crashes at the same step. I updated my UEFI yesterday and made sure all my settings were correct for hackintosh, my current 10.10 install boots flawlessly so I think my UEFI is not the problem.
What am I doing wrong/how can I fix this issue?
Thanks in advance
Edit: My specs:
- i3 4330
- MSI H87i-Ac
- 8GB ddr3-1600 (2x4gb)
- internal graphics via DP on 1920x1080
- 840 evo 120GB
I want to install a fresh version of 10.11 on my now 10.10 clover system. I created the USB like this:
- terminal command to copy installer to usb
- install clover for uefi only 64bit with EmuVariable, OsxAptioFixDrv and PartitionDxe
- replace vboxhfs with hfsplus
- place fakesmc and realtek kext in 10.11 kexts folder (also tried 'other' folder)
- in config plist, change csractiveconfig value to 0x3 (also tried with original value)
- in config plist, fill in fresh generated SN, SmUUID, MLB values
- tried booting with and without rootless=0
When booting from USB, clover shows. I select the installer, the apple logo shows and after 2 sec the screen flashes black and the PC reboots. When booting verbose (with or without cache), the crash happens at line 3, which looks like this:
++++++++++++++++++++++++++++++++++++++++++++++++
When using Vboxhfs instead of hfsplus, it takes a couple of seconds longer for the crash to occur, however in verbose it still crashes at the same step. I updated my UEFI yesterday and made sure all my settings were correct for hackintosh, my current 10.10 install boots flawlessly so I think my UEFI is not the problem.
What am I doing wrong/how can I fix this issue?
Thanks in advance
Edit: My specs:
- i3 4330
- MSI H87i-Ac
- 8GB ddr3-1600 (2x4gb)
- internal graphics via DP on 1920x1080
- 840 evo 120GB