No Audio Devices - Realtek ALC AppleHDA [Guide]

[erod998]

Asus Rampage 4 Black Edition
4930k at 4700 MHZ
Corsair Vengeance Red 8x2 16 Gig 1866 MHZ Ram
Gigabyte GTX 970 G1 Edition
Yosemite 10.10.1
Less Important Specs*
Samsung 850 Pro 240 GB for Yosemite
Dual boot with Windows 8.1
Corsair AX860
Corsair 400r

I used Clover as my boot loader, following this guide:
i7-4930K - Asus Rampage IV Extreme - 32GB RAM - GTX 770 4GB [Success!!]

Next, I got the hackintosh working. I recently used Chimera but I kept having a ton of kernel panics so I switched, and this has been running strong for 4 days now. Old install froze every 10 mins.
So, I have 2 monitors. One HDMI, one Display port to HDMI. I couldn't boot with both, so I followed toleda's frame buffer guide and fixed that. Next was to tackle audio with my ALC1150 codec. Still can't get it working after 3 days of work. And I must of screwed something up because now the frame buffer edit isn't working. I am at a loss. Can you help? I have attached a link to my EFI partition.

https://www.dropbox.com/sh/usoa34puj9vky84/AAALTRvzO6uxwMj1wGqEF5l0a?dl=0


If you could help me, that would be awesome. This is my first hackintosh build so I have a little trouble following your guides. Thanks so much!!!

 

[toleda]

Don't now how to enable my audio device.

See Post #1, Realtek ALC AppleHDA

 

[toleda]

can't get it working after 3 days of work.

Audio does not work with AppleHDA in the EFI folder, remove.
No evidence any audio installation method was used.
See Post #1, Realtek ALC AppleHDA; select one method and install.

 

[erod998]

Tried the clover method. Got this error:

[FONT=Menlo]File: audio_cloverALC-100.command_v1.0.4d[/FONT][FONT=Menlo]Verify EFI partition mounted, Finder/Devices/EFI[/FONT]
[FONT=Menlo]Password:[/FONT]
[FONT=Menlo]EFI partition is mounted[/FONT]
[FONT=Menlo]S/L/E/AppleHDA.kext is not native[/FONT]
[FONT=Menlo]Install native AppleHDA.kext[/FONT]
[FONT=Menlo]No system files were changed[/FONT]
[FONT=Menlo]To save a Copy to this Terminal session: Terminal/Shell/Export Text As ...[/FONT]
[FONT=Menlo]logout[/FONT]
[FONT=Menlo]
[/FONT]
[FONT=Menlo][Process completed][/FONT]
[FONT=Menlo]
[/FONT]

Any ideas?

 

[toleda]

Any ideas?

Install native AppleHDA.kext

 

[TomHsiung]

Audio does not work with AppleHDA in the EFI folder, remove.
No evidence any audio installation method was used.
See Post #1, Realtek ALC AppleHDA; select one method and install.

@toleda

Hi, did you mean that the way of putting appleHDA.kext of 269.25-toledaALC1150 into /EFI/CLOVER/kexts/10.10 was ineffective?

I just put the file into the folder. After rebooting, no audio device was found.

Tom

 

[toleda]

did you mean that the way of putting appleHDA.kext of 269.25-toledaALC1150 into /EFI/CLOVER/kexts/10.10 was ineffective?

Yes.

 

[danielscake]

1. I have no outputs or inputs working.
2. Yosemite 10.10.3 / MSI z87 -GD65 / Bios 1.B / Intel Core i7 4770K / Gigabyte GeForce GTX 760
3. MultiBeast for RealtekALC 1005
4. attached
5. attached
6. N/A
7. N/A (file was too big to attach?)
8. System information just says Audio ID: 1
9. N/A
10. N/A
11. attached

I'm still new to this and was only able to find those three.

I also have an issue where my webcamera's microphone isn't picked up by Mac, the video is though.

Thank you.

 

[toleda]

1. I have no outputs or inputs working.

See Post #1, III No Codec

 

[erod998]

Still can't figure out how to inject the AppleHDA.kext