Contribute
Register

APPLE LOGO BLANK SCREEN AFTER IBOOT

Status
Not open for further replies.
rupesh1718

rupesh1718

Joined
Jul 20, 2011
Messages
6
Motherboard
intel DH67BL
CPU
intel core i7
Graphics
ATI raiden 5750
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. Android
  2. iOS
I am trying to install mac os x snowleopard
I have the retail dvd
When i insert Iboot (after making the settings in BIOS of AHCI and s3 state)
and remove Iboot and press f5
then I get Found Bios in left upper corner then an Apple Logo appears then Nothing Happens
I tried with Some commands too Like
PCIRootUID=1 or PCIRootUID=1 -x or -x
Still the same problem exist
I have kept my pc on 4 gb ram as per requirement
 
Is there an HPET option in BIOS? If so enable it.

You might try a different SATA port for your HDD.

Are both DVD and HDD SATA drives....should ask that first.

Did you try all the video card ports, sometimes only one is enabled until you patch the kext

Did you try GraphicsEnabler=YES at the Chameleon prompt.
 
TRIED withenabling HPET
aNd GraphicsEnabler=YES in charmeleon menu still i get apple lank logo

MY PC Config
4gb ram
intel dg35ec motherboard
ATi RAIDEn HD5750 gfx card
1.5 tb hdd
 
You can only install Snow Leopard on a drive partition smaller than 1TB, so if you have only one partition, you will need to create a second using Disk Utility....this can be done from the Install Disk using Disk Utility.
 
SnapMan said:
You can only install Snow Leopard on a drive partition smaller than 1TB, so if you have only one partition, you will need to create a second using Disk Utility....this can be done from the Install Disk using Disk Utility.
Click to expand...
I have made 4 partion to my hard disk each of 349 gb and one partion of it completely Empty Now what is it my ATI card Problem Should I go for Internal Intel GFX card
 
Got the error
"verification of clock speed failed fallback correction was performed."
how to sort this out
 
"verification of clock speed failed fallback correction was performed."
Click to expand...

The SL HDD is the only HDD connected?

No OCing in BIOS?

The busratio is unchanged from stock?
 
SnapMan said:
"verification of clock speed failed fallback correction was performed."
Click to expand...

The SL HDD is the only HDD connected?

No OCing in BIOS?

The busratio is unchanged from stock?
Click to expand...
What is SL HDD can i detect it any how ?
i tried using the command -x -v busratio=20 cpus=1
then after the aplle logo loading started but now struk on loaing
 
I've checked verbos and it says that it failed to ad kext com.apple.driver.AppleIntelCPUPowermanagement... :banghead:
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top