Yosemite On ECS H61H2-I Installation Guide

[ibeback403]

Hi Guy

This Install may help some one here...sorry for my English.
Here are the System i Bill.


1 System one
Ecs H61H2-I
Intel i3-2100 3.1 Lga 1155
Corsair 4GB 1333Hz
Nvidia Evga 8800GTS 320MB
WD 1TB Green
Os Yosemite 10.10
MultiBeast 7.0.1

App and Game Install:

1. XBMC
2. MS OFFICE 2011
3. PHOTOSHOP LIGHTROOM 5
4. BATTLE.NET WORLD OF WARCRAFT
5. STEAM DOTA 2

This System was bill because all the parts sit around. Not bill for game but is good for game too.

Install OS X Yosemite

1. Turn on the computer
2. Press the hotkey to choose boot device (usually F12 or F8)
3. Choose USB-HDD
4. At the Chimera Boot Screen, choose USB and hit Enter
5. Type: -x GraphicsEnabler=Yes at the Boot screen.

​When done install i use MultiBeast 7.0.1 Here the setting.

MultiBeast Configuration - 2014-12-09 01:57:53
Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC892
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v6.11.1328
Drivers > Misc > FakeSMC v6.11.1328 Plugins
Drivers > Misc > FakeSMC v6.11.1328 HWMonitor Application
Drivers > Misc > NullCPUPowerManagement
Drivers > Misc > PS/2 Keyboard/Mice and Trackpads
Drivers > Misc > USB 3.0 - Universal
Drivers > Network > Realtek > AppleRTL8169Ethernet 2.0.6
Bootloaders > Chimera v4.0.0
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > Kext Dev Mode
Customize > Boot Options > Use KernelCache
Customize > System Definitions > iMac > iMac 12,2
Customize > Themes > tonymacx86 remixed




SYSTEM WORK 90% SLEEP NOT WORK
THAT ALL HAVE FUN GUY AND THANK TONY FOR ALL THE WORK

 

[amgclk65]

Hello..
Did you have to patch the bios first ?

 

[ibeback403]

No that all I done

 

[amgclk65]

Thanks.
Im going to get the h61h2-I tomorrow. it should be easy with no bios patch

 

[amgclk65]

Getting kernel panic.
Launchd died/nState at last exception

UPDATE
had to add cpus=1 to boot flag.

 

[tyeh]

I have an ECS H61H2-I with G2030T and system must set cpus=1 to boot. It seems no one has the solution.

 

[amgclk65]

Hello.
Install this kext with a kext installer of your choice. Reboot without cpus=1. You'll have both cores working after that.

http://forge.voodooprojects.org/p/voodootscsync/downloads/

 

[tyeh]

After the kext was installed, now the system is able to boot without cpus=1. Actually I saw others talk about this kext when their system has similar issue. But I thought voodoo kext is for audio and I didn't pay attention. Thanks a lot!
By the way, I found the CPU fan control on ECS H61H2-I does not work as I expected. When I configure an initial speed, it will stay in that speed and never increase its speed with heavy load. But I can use HWMonitor to control the fan speed well. Do you see this issue on your ECS H61H2-I?

 

[amgclk65]

Actual I didn't noticed that. I'll look into that. Before I had it over to my brother. Also does your optical audio work? I've got 3.5mm aux and Hdmi via graphics card working.

 

[tyeh]

Wow, that is great. I use a cheap MSI HD 6450 and plan to work on its HDMI audio and noisy fan next. As the optical output, it does not work in Windows 8 yet and that maybe is the A/V receiver problem. My wife always complains when I turn on A/V receiver when I watch movies . Therefore, I just use HDMI audio with TV and A/V receiver had been idle for at least two years.