Xiaomi Book Air 2018 TIMI TM1703

[face1203]

Your ioreg proves important renames are missing (HECI->IMEI, for example).
Refer to the guide for correct plists:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also...
"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Thanks a lot. It seems working well for the brightness now. So it is pretty much all good for the daily uses. Really appreciated.

For the further improvements, I am not quite sure whether they are possible or not.
First, the Buletooth is not on, it seems that the bluetooth driver is always a problem for the laptops. But if I boot the laptop to the windows 10 first and restart it to Mac, the bluetooth will be on. So not quite sure how to make it working at the mac boot.
Second, the touch pad is not perfect. It is working for the basic moves, but it is not slick and the features are random working. For the moment, I use the latest version of VoodooPS2Controller, is it may be better to use VoodooI2C?

 

[RehabMan]

Thanks a lot. It seems working well for the brightness now. So it is pretty much all good for the daily uses. Really appreciated.

For the further improvements, I am not quite sure whether they are possible or not.
First, the Buletooth is not on, it seems that the bluetooth driver is always a problem for the laptops. But if I boot the laptop to the windows 10 first and restart it to Mac, the bluetooth will be on. So not quite sure how to make it working at the mac boot.
Second, the touch pad is not perfect. It is working for the basic moves, but it is not slick and the features are random working. For the moment, I use the latest version of VoodooPS2Controller, is it may be better to use VoodooI2C?

See FAQ for recommended BT/WiFi hardware:
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

The I2C thread is also linked from the FAQ...

 

[gecko131]

Hello.
I am new and I plan to install MacOs Mojave on my XIAOMI Air 13 2018 (kakylake 8250U / Intel 620). Where can I get kexts for this XIAOMI Air 13 ? Thank you to all of you !!

 

[Feartech]

Hello.
I am new and I plan to install MacOs Mojave on my XIAOMI Air 13 2018 (kakylake 8250U / Intel 620). Where can I get kexts for this XIAOMI Air 13 ? Thank you to all of you !!

Read up on the FAQ first:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

Link to laptop guide:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com