Xiaomi Air 13.3 I5 6200U has been successfully installed Majove PB

[firstcreative]

I have successfully installed Majove PB on my MiNote Air using fakeid 0x12345678 which should be setted in clover graphics options. After installation，I used kext utility to install AppleIntelSKLgraphicsframebuffer.kext which is in the EFI\kexts folder to rebuild the Extensions，Which will work for Intel HD520 from 7M to 1536M. I have attached my EFI folders below， and hope you good luck.
MiNote Air works well with Majove except the Wifi and empty track pad.

 

[ben9923]

Why installing patched/old kext? You should fix whatever problem prevented you from booting (Might be DVMT-prealloc not set to 64MB in BIOS? A KextsToPatch entry is better than installing a different kext).

Note: When using -lilubetaall you don't need a beta flag for each Lilu plugin.

 

[RehabMan]

I have successfully installed Majove PB on my MiNote Air using fakeid 0x12345678 which should be setted in clover graphics options. After installation，I used kext utility to install AppleIntelSKLgraphicsframebuffer.kext which is in the EFI\kexts folder to rebuild the Extensions，Which will work for Intel HD520 from 7M to 1536M. I have attached my EFI folders below， and hope you good luck.
MiNote Air works well with Majove except the Wifi and empty track pad.

Why installing patched/old kext? You should fix whatever problem prevented you from booting (Might be DVMT-prealloc not set to 64MB in BIOS? A KextsToPatch entry is better than installing a different kext).

Note: When using -lilubetaall you don't need a beta flag for each Lilu plugin.

Most likely the problem is due to Clover injecting AAPL,GfxYTile.
I removed it from my local copy of Clover as it seems to cause a hang on boot with 10.14.

I wrote about it here:
https://www.insanelymac.com/forum/t...ort-and-patch/?do=findComment&comment=2623462

 

[firstcreative]

Why installing patched/old kext? You should fix whatever problem prevented you from booting (Might be DVMT-prealloc not set to 64MB in BIOS? A KextsToPatch entry is better than installing a different kext)

Note: When using -lilubetaall you don't need a beta flag for each Lilu plugin.

The AppleintelSKLgraphicsframebuffer.kext was modified by DVMT path like this:
Broadwell (5th HD5500 5300 6000):

• Kext: com.apple.driver.AppleIntelBDWGraphicsFramebuffer
• Find: 764048FF 05122B06
• Repl: EB4048FF 05122B06

SkyLake (6th HD520 530):

• Kext: com.apple.driver.AppleIntelSKLGraphicsFramebuffer
• Find: 764048FF 0561E907
• Repl: EB4048FF 0561E907

KabyLake(7th HD620 630 8th UHD620 630):

• Kext: com.apple.driver.AppleIntelKBLGraphicsFramebuffer
• Find: 764648FF 05025208
• Repl: EB4648FF 05025208

 

[RehabMan]

The AppleintelSKLgraphicsframebuffer.kext was modified by DVMT path like this:
Broadwell (5th HD5500 5300 6000):

• Kext: com.apple.driver.AppleIntelBDWGraphicsFramebuffer
• Find: 764048FF 05122B06
• Repl: EB4048FF 05122B06

SkyLake (6th HD520 530):

• Kext: com.apple.driver.AppleIntelSKLGraphicsFramebuffer
• Find: 764048FF 0561E907
• Repl: EB4048FF 0561E907

KabyLake(7th HD620 630 8th UHD620 630):

• Kext: com.apple.driver.AppleIntelKBLGraphicsFramebuffer
• Find: 764648FF 05025208
• Repl: EB4648FF 05025208

Best to apply such patches with config.plist/KernelAndKextPatches/KextsToPatch.
Or use IntelGraphicsDVMTFixup.kext instead.

 

[firstcreative]

Best to apply such patches with config.plist/KernelAndKextPatches/KextsToPatch.
Or use IntelGraphicsDVMTFixup.kext instead.

Best to apply such patches with config.plist/KernelAndKextPatches/KextsToPatch.
Or use IntelGraphicsDVMTFixup.kext instead.

ok, thx.

 

[PavelIT]

Man you can just set DVMT to 64MB in BIOS, Wootever unlocked using of modded BIOS on Air 2016 model. More info on xda-developers. Refer me if you need help

 

[johnnync21]

Install my efi.
Works all less brightness key because I don't have laptop to do it