X99 instant wake

[irix]

Hello,

After my 10 years old hackintosh died, i have built new one:
MB: HUANAN x99-TF
CPU:XEON 2678v3
RAM 64GB DDR3
GTX780TI

It works great on Mojave/Catalina except one single issue - instant wake.
It goes sleep normally and in 1-2 seconds wakes back.

Most strange is that wake reason shows nothing :-D

"Wake from Normal Sleep [CDNVA] due to /: Using AC (Charge:0%)"

Tested on Mojave and Cataline and issue is the same.
Tested on Win10 on the same bios settings and no issue - sleeps normally.

Any advices?
I thing i have tried almost everything but no success. Actually i have no idea where to look as the wake reason i empty :-D

Regards

 

[irix]

Solved!!!

Problem was, hidden JPWR switch under rear ports cover :-D

 

[avs]

Solved!!!

Problem was, hidden JPWR switch under rear ports cover :-D

Glad to hear you made it, would you like to help me, im stuck with instant wake with no reason problem on same motherboard, do you patched _PRW (_GPRW)?

 

[irix]

Hello, only patches I have are for usb and cpu power management to enable turbo boost.

Please let me know if your problem is - It goes sleep an immediately wakes. Or go to sleep and won't wake by keyboard?

 

[avs]

It goes sleep, power shutdown for 1 sec and go back to wake up, what patches do you using for usb?

 

[irix]

So there is relation between JPWR jumper under white cover and Bios setting Advacned -> ACPI Seetings -> Enable Hibernation

JPWR = OFF Enbale Hibernation = Enabled - same behavior like yours
JPWR = OFF Enable Hibernation = Disabled - it goest sleep well but no wake from keyboard or mouse
JPWR = ON Enable Hibernation = Enabled - all works OK

I will attach my config.plist later today if you like.

 

[dark_ata]

hello can you post your config.plist, i will try install today

 

[pennismen]

irix if you can please post link to EFI folder because it's a headache run SLEEP with X99-TF + 2678v3.

If someone could do it please post solution.

Thanks.

 

[irix]

Please find attached CLOVER folder. (Please generate your own serial numbers)

Didi you set JPWR jumpers correctly?

 

[mdenissov]

Hello,

After my 10 years old hackintosh died, i have built new one:
MB: HUANAN x99-TF
CPU:XEON 2678v3
RAM 64GB DDR3
GTX780TI

It works great on Mojave/Catalina except one single issue - instant wake.
It goes sleep normally and in 1-2 seconds wakes back.

Most strange is that wake reason shows nothing :-D

"Wake from Normal Sleep [CDNVA] due to /: Using AC (Charge:0%)"

Tested on Mojave and Cataline and issue is the same.
Tested on Win10 on the same bios settings and no issue - sleeps normally.

Any advices?
I thing i have tried almost everything but no success. Actually i have no idea where to look as the wake reason i empty :-D

Regards

Hello! Have you upgraded to Big Sur?