X99 build for Snow Leopard 10.6.8 and Yosemite dual boot

[Jassida]

Hi.

I'm helping a friend put a build together for Pro Tools 11.

one big question is whether 10.6.8 will work as he needs to dual boot to it for compatibility.

Thanks.

 

[MacZach94]

I do not believe that it would be able to run both as the x99 are for new CPUs that are not supported in 10.6.8. If it did work you would have a few issues that wold make it unusable. But that's in my experience thought, maybe someone got it to work flawlessly.

 

[Jassida]

Ok will assume it won't work thanks.

 

[Money]

of course u need 2 SSD or Hdd...
It works, idont know how i did it but i made it one time.
I run Yose but now i wanted to have Snow leopard or Lion for the same reasen.
Pro tools run in Yose too but with visual Problems & i wanted to check if i can use more Plugs
in Snow Leo just to know & of cours to use it without this visual Problems.

I used a i7 5930k CPU Cinebench 11,5 in YOsemite is 13,86 with my in my GA X99 SOC FORCE @4,3Ghz
And i had the same result in SNOW LEOPARD TOO

Now i Use a E5 2699v3 but not with all cores caus it just wor with 15 Cores & Hyperthreading so 30 Cores or just with the 18 Cores. I use the same Kernel file like i used for the 5930k.
Cinebench 11,5 with 15Cores & Hyper in Yosemit is 21,88
Cinebench 11,5 with jus the 18Cores & no Hyper about 20.....

I tried & tried to make it again but didnt make it and now im tired of it.
So Maybe someone knows....


look

http://www.tonymacx86.com/snow-leop...now-how-i-can-change-kernel-snow-leopard.html

 

[Money]

Now i remember. u can change the Snow Leopard Kernel with the VoodooTSCSync.kext
which is in this file

FileSort asc/desc	Summary	SizeSort asc/desc	UploadedSort asc/desc
tsc.tgz	VoodooTSCSync.kext 32/64 compiled on 10.7.3 w/ xcode 4.3	13.39 kB	2012-03-05

found on this link
http://forge.voodooprojects.org/p/voodootscsync/downloads/


just need to put it into thisKext Utiliy Just open it &let it work than put it into it & let it work..thats it..
found on this link
http://www.tonymacx86.com/downloads.php?do=file&id=44


It works for a lot of 2011-3 CPUs.

With my i7 5930k i had the same cinebench 11,5 result like in Yose, so 13,75
Now i use a Xeon E5 2699v3 ,can only use the 18 Kernels witout hyperthreading with this Kernel in SL.
Cinebench 11,5 result, tried just 32bit, 18,68 (maybe more, about 21 with 64bit)

In Yose with another kernel file i can use all 18 kernels without Hyperthreading cinebench 11,5 = 20,85
Or 15 Kernels with hyperthreading cinebench 11,5 = 21,88

So this S Leo kERNEL file works with all CPUs of the Socket 2001-3

Maybe u jaust cant use Hyperthreading with some Xeon CPUs

So with all those CPUs ------->

Socket 2011-3
Motherboard	Model	GA-X99-SOC Force
PCB	1.0
vendor	CPU Model	Frequency	L3 Cache	Core Name	Process	Stepping	Wattage	BCLK	Since BIOS Version
Intel	Core i7-5960X	3.00GHz	20MB	Haswell-E	22nm	R2	140W	100	F3
Intel	Core i7-5930K	3.50GHz	15MB	Haswell-E	22nm	R2	140W	100	F3
Intel	Core i7-5820K	3.30GHz	15MB	Haswell-E	22nm	R2	140W	100	F3
Intel	XEON E5-4669v3	2.10GHz	45MB	Haswell-EP	22nm	C1	135W	100	F5
Intel	XEON E5-4667v3	2.00GHz	40MB	Haswell-EP	22nm	C1	135W	100	F5
Intel	XEON E5-4660v3	2.10GHz	35MB	Haswell-EP	22nm	C1	120W	100	F5
Intel	XEON E5-4655v3	2.90GHz	30MB	Haswell-EP	22nm	M1	135W	100	F5
Intel	XEON E5-4650v3	2.10GHz	30MB	Haswell-EP	22nm	C1	105W	100	F5
Intel	XEON E5-4648v3	1.70GHz	30MB	Haswell-EP	22nm	C1	105W	100	F5
Intel	XEON E5-4640v3	1.90GHz	30MB	Haswell-EP	22nm	C1	105W	100	F5
Intel	XEON E5-4627v3	2.60GHz	25MB	Haswell-EP	22nm	M1	135W	100	F5
Intel	XEON E5-4620v3	2.00GHz	25MB	Haswell-EP	22nm	C1	105W	100	F5
Intel	XEON E5-4610v3	1.70GHz	25MB	Haswell-EP	22nm	C1	105W	100	F5
Intel	XEON E5-2699v3	2.30GHz	45MB	Haswell-EP	22nm	C1	145W	100	F3
Intel	XEON E5-2698v3	2.30GHz	40MB	Haswell-EP	22nm	C1	135W	100	F3
Intel	XEON E5-2697v3	2.60GHz	35MB	Haswell-EP	22nm	C1	145W	100	F3
Intel	XEON E5-2695v3	2.30GHz	35MB	Haswell-EP	22nm	C0	120W	100	F3
Intel	XEON E5-2690v3	2.60GHz	30MB	Haswell-EP	22nm	M0	135W	100	F3
Intel	XEON E5-2687Wv3	3.10GHz	25MB	Haswell-EP	22nm	M0	160W	100	F3
Intel	XEON E5-2685v3	2.60GHz	30MB	Haswell-EP	22nm	M0	120W	100	F3
Intel	XEON E5-2680v3	2.50GHz	30MB	Haswell-EP	22nm	M0	120W	100	F3
Intel	XEON E5-2670v3	2.30GHz	30MB	Haswell-EP	22nm	M0	120W	100	F3
Intel	Xeon E5-2667v3	3.20GHz	20MB	Haswell-EP	22nm	R2	135W	100	F3
Intel	Xeon E5-2660v3	2.60GHz	25MB	Haswell-EP	22nm	M0	105W	100	F3
Intel	Xeon E5-2650v3	2.30GHz	25MB	Haswell-EP	22nm	M0	105W	100	F3
Intel	Xeon E5-2650Lv3	1.80GHz	30MB	Haswell-EP	22nm	M0	65W	100	F3
Intel	Xeon E5-2640v3	2.60GHz	20MB	Haswell-EP	22nm	R2	90W	100	F3
Intel	Xeon E5-2630v3	2.40GHz	20MB	Haswell-EP	22nm	R2	85W	100	F3
Intel	Xeon E5-2629v3	2.40GHz	20MB	Haswell-EP	22nm	M0	85W	100	F3
Intel	Xeon E5-2623v3	3.00GHz	10MB	Haswell-EP	22nm	R2	105W	100	F3
Intel	Xeon E5-2622v3	2.40GHz	20MB	Haswell-EP	22nm	R2	85W	100	F3
Intel	Xeon E5-2620v3	2.40GHz	15MB	Haswell-EP	22nm	R2	85W	100	F3
Intel	Xeon E5-2609v3	1.90GHz	15MB	Haswell-EP	22nm	M1	85W	100	F3
Intel	Xeon E5-2603v3	1.60GHz	15MB	Haswell-EP	22nm	R2	85W	100	F3
Intel	Xeon E5-1680v3	3.20GHz	20MB	Haswell-EP	22nm	R2	140W	100	F3
Intel	Xeon E5- 1650v3	3.50GHz	15MB	Haswell-EP	22nm	R2	140W	100	F3
Intel	Xeon E5-1630v3	3.70GHz	10MB	Haswell-EP	22nm	R2	140W	100	F3
Intel	Xeon E5-1620v3	3.60GHz	10MB	Haswell-EP	22nm	R2	140W	100	F3

But i need some help, cause i just can start it with iboot lagacy till now
I dont need some kext for audio cause i got a digi 003r with Mac drivers.
I dont need some Kext for my VGA Card cause i got the quadro FX 5600 for windows & use the Mac drivers for it.

So what do i need to start it with chimera / chameleon ?

Can sb help me Please?

I will start to do a istall iintroduction for x99 Boards For Snow leopard, Lion, Mounten Lion & Mavaricks.

Sb out here wanne help me? tell me...